Laser 2000

TDI Camera

C10000-801

TDI cameras are designed for niche applications, to find your perfect match please contact our experts.

The C10000-801 TDI camera is useful for a wide range of imaging applications requiring high-speed operation with high sensitivity simultaneously. TDI is a special image acquisition method that has been used extensively in machine vision applications for industrial inspection. TDI imaging is appropriate for applications where it is desired to record a linear process over time, or where the aspect ratio of the subject being imaged is significantly asymmetric. TDI is particularly useful for low light level scanning applications for which a typical line scan camera can not make a useful image. Also, frame readout mode is available for easy focusing.

Features:

  • High resolution / high sensitivity (Horizontal spatial resolution with 128(V) TDI stages): 2048(H) × 128 (V), 4 TAP
  • Line rate up to 50 kHz
  • High speed imaging combined with high sensitivity and low noise
  • Great spectral response for UV-NIR with back-thinned CCD
  • 100× anti-blooming with lateral overflow drain
  • Dynamic range of 1600:1
  • 12 bit / 8 bit selectable A/D converter
  • Bidirectional scanning operation
  • Frame readout mode for easy focusing
  • Real time shading correction internal DSP

Principle of TDI Technology 

Type number C10000-801
Imaging device Back thinned type
Effective number of pixels 2048 (H)×128 (V)
Cell size 12 μm (H)×12 μm (V)
Effective area 24.58 mm (H)×1.536 mm (V)
Readout mode TDI readout mode / frame readout mode*1
TDI transfer direction Bidirectional transfer
TDI output channel 4 TAP (512×128)
Anti-blooming Yes (100 times of the full well capacity)
TDI pixel clock rate 30 MHz
TDI line rate 0.457 kHz to 50 kHz
TDI line rate control Internal setting by serial command*2 / External trigger
Full well capacity 80 000 electrons (typ.)
Readout noise 50 electrons rms (typ.)
Dynamic range 66.66736111
Binning 2×2, 4×4
Analog gain 1 time to 5 times (16 steps)
A/D converter 12 bit/8 bit*3
Image processing Real-time shading correction / Back ground subtraction
Interface Camera Link base configuration
Camera control Serial control in Camera Link
Camera output clock 60 MHz
Camera output channel 2 TAP (1024×128)
Connector Mini-Camera Link (SDR)×1
Lens mount F-mount
Power requirements AC100 V to AC240 V, 50 Hz/60 Hz
Power consumption Approx. 55 VA
Ambient operating temperature 0 ℃ to +40 ℃
Ambient storage temperature -10 ℃ to +50 ℃
Ambient operating/storage humidity 90 % or less (with no condensation)
Ambient operating humidity 30 % to 70 % (with no condensation)

*1 Frame readout mode is useful for easy focusing, but it is not suitable for measurement. Please consult with our sales office for details.
*2 Internal TDI line rate is set by 33 ns step.
*3 Selectable by serial command.

Catalog
Spectral Response
Dimensions
Camera Line Up
BACK
TO TOP

Request a Demo

C10000-801

Ask the Expert

If you’re interested in the products shown here, or have questions about something you can’t find on our website, please get in touch through the form below.

Our knowledgeable sales team will be happy to help. We can normally source exactly what you need, or work with you to come up with custom solutions.

Alternatively, just call +44 (0) 1933 461 666 and ask to speak to the Photonics team.

Ask the Expert

If you’re interested in the products shown here, or can’t find exactly what you need, please get in touch with our specialist through the form below.

Alternatively, just call +44 (0) 1933 461 666 and ask to speak to Toby.

Toby Scrivener

MPhys (Hons)

Ask the Expert

If you’re interested in the products shown here, or can’t find exactly what you need, please get in touch with our specialist through the form below.

Alternatively, just call +44 (0) 1933 461 666 and ask to speak to Karen.

Karen McGeachy West

MPhys (Hons)

Ask the Expert

If you’re interested in the products shown here, or can’t find exactly what you need, please get in touch with our specialist through the form below.

Alternatively, just call +44 (0) 1933 461 666 and ask to speak to Peter.

Peter Collins

BEng (Hons), MSc (Eng)

Ask the Expert

If you’re interested in the products shown here, or can’t find exactly what you need, please get in touch with our specialist through the form below.

Alternatively, just call +44 (0) 1933 461 666 and ask to speak to Sian.

Siân Brooks

BSc (Hons)

Ask the Expert

If you’re interested in the products shown here, or can’t find exactly what you need, please get in touch with our specialist through the form below.

Alternatively, just call +44 (0) 1933 461 666 and ask to speak to Dan.

Dan Young

BSc (Hons)

Ask the Expert

If you’re interested in the products shown here, or can’t find exactly what you need, please get in touch with our specialist through the form below.

Alternatively, just call +44 (0) 1933 461 666 and ask to speak to Paul.

Paul Williams

PhD

Ask the Expert

If you’re interested in the products shown here, or can’t find exactly what you need, please get in touch with our specialist through the form below.

Alternatively, just call +44 (0) 1933 461 666 and ask to speak to Lisa.

Lisa Thomson

MPhys

Ask the Expert

If you’re interested in the products shown here, or can’t find exactly what you need, please get in touch with our specialist through the form below.

Alternatively, just call +44 (0) 1933 461 666 and ask to speak to Alex.

Alex Elliott

MPhys (Hons)

Ask the Expert

If you’re interested in the products shown here, or can’t find exactly what you need, please get in touch with our specialist through the form below.

Alternatively, just call +44 (0) 1933 461 666 and ask to speak to Shannon.

Shannon O’Connor

BSc (Hons)

Ask the Expert

If you’re interested in the products shown here, or can’t find exactly what you need, please get in touch with our specialist through the form below.

Alternatively, just call +44 (0) 1933 461 666 and ask to speak to Sarah.

Sarah Hampson

PhD, MChem (Hons), MRSC