Laser 2000

OEM Power & Energy Sensors

Laser 2000 offers Laser Point OEM sensors for sensitive and accurate energy/power measurements.

Sensor discs manufactured by Laser Point are characterized by high sensitivity and low impedance. High sensitivity is important to maximize the signal-to-noise ratio when working at low powers. Around those sensor disks, complete OEM heads are designed and supplied with housings, cooling systems and amplifying electronics based on Customer’s requirements and specifications.

Compared to other types of sensors which might be used in equivalent applications, thermopile detectors can be applied directly onto the beam, even at high powers.

Laser Point sensors are made with robust materials and coatings that can be used from UV to Far Infrared and with concentrated beams, without the risk of damaging the detector even at extreme power densities.

Laser Point provides thermopiles with a high degree of linearity over their entire working range and with large areas suitable for the largest beams..

Thermopile sensors are almost insensitive to the position and the size of the beam when it strikes on their active area. Therefore alignment is never critical and installation time for OEM applications is fast.

Everything has been designed to provide accurate and reliable measurements of lasers such as CO2, Excimers, Laser Diodes, Nd-Yag from 3W to 200W at competitive prices.

Showing all 4 results

10 per page
Showing 1 – 4 of 4 results Showing all 4 results Showing one result No results found, please broaden your parameters, or get in touch.
Filters Sort results
Reset Apply
Products
Product Code
Description
OEM Sensor AHA Series Can be applied directly to laser light, a high degree of linearity with fast response time (70ms) and broadband operation from UV to Far infrared. Medium power range (5W-20W)
Read more...
OEM Sensor AHW Series Higher power ranges (20W-100W)
Read more...
OEM Sensor CSA Series Low power ranges (20mW- 20W), very low power resolution (100µW)
Read more...
OEM Sensor SD Series Medium power range (20W-200W), low response time (0-90%) < 1 sec
Read more...

Laser Point manufactures a wide portfolio of laser power and energy meters able to perform laser measurements with high accuracy up to multi-kilowatts optical power level. They also provide unique in the market and patented Hi Tech solutions to measure  ultrafast lasers down to picosecond and femtosecond pulse duration and high repetition rates up to MHz range. Laser Point developed the best hard coating to absorb the laser radiation which allows its laser and energy sensors to safely work to the highest level of optical power density! For more than 30 years Laser Point has consistently supplied its OEM, industrial, medical, and scientific customers worldwide with laser power and energy tools that proved their accuracy and reliability.

BACK
TO TOP

Ask the Expert

For over 30 years, Laser 2000 has supplied fibre optic equipment and worked with global partners like VIAVI Solutions, US Conec and INNO Instrument.

For more information on our fibre optic technology and our wide range of products, please visit our Laser 2000 Networks website, or get in touch with our specialist through the form below.

Alternatively, just call +44 (0) 1933 461 666 and ask to speak to Mike.

Mike Fletcher

BSc (Hons)

Ask the Expert

If you’re interested in the products shown here, or have questions about something you can’t find on our website, please get in touch through the form below.

Our knowledgeable sales team will be happy to help. We can normally source exactly what you need, or work with you to come up with custom solutions.

Alternatively, just call +44 (0) 1933 461 666 and ask to speak to the Photonics team.

Ask the Expert

If you’re interested in the products shown here, or can’t find exactly what you need, please get in touch with our specialist through the form below.

Alternatively, just call +44 (0) 1933 461 666 and ask to speak to Toby.

Toby Scrivener

MPhys (Hons)

Ask the Expert

If you’re interested in the products shown here, or can’t find exactly what you need, please get in touch with our specialist through the form below.

Alternatively, just call +44 (0) 1933 461 666 and ask to speak to Karen.

Karen McGeachy West

MPhys (Hons)

Ask the Expert

If you’re interested in the products shown here, or can’t find exactly what you need, please get in touch with our specialist through the form below.

Alternatively, just call +44 (0) 1933 461 666 and ask to speak to Peter.

Peter Collins

BEng (Hons), MSc (Eng)

Ask the Expert

If you’re interested in the products shown here, or can’t find exactly what you need, please get in touch with our specialist through the form below.

Alternatively, just call +44 (0) 1933 461 666 and ask to speak to Sian.

Siân Brooks

BSc (Hons)

Ask the Expert

If you’re interested in the products shown here, or can’t find exactly what you need, please get in touch with our specialist through the form below.

Alternatively, just call +44 (0) 1933 461 666 and ask to speak to Dan.

Dan Young

BSc (Hons)

Ask the Expert

If you’re interested in the products shown here, or can’t find exactly what you need, please get in touch with our specialist through the form below.

Alternatively, just call +44 (0) 1933 461 666 and ask to speak to Paul.

Paul Williams

PhD

Ask the Expert

If you’re interested in the products shown here, or can’t find exactly what you need, please get in touch with our specialist through the form below.

Alternatively, just call +44 (0) 1933 461 666 and ask to speak to Lisa.

Lisa Thomson

MPhys

Ask the Expert

If you’re interested in the products shown here, or can’t find exactly what you need, please get in touch with our specialist through the form below.

Alternatively, just call +44 (0) 1933 461 666 and ask to speak to Alex.

Alex Elliott

MPhys (Hons)

Ask the Expert

If you’re interested in the products shown here, or can’t find exactly what you need, please get in touch with our specialist through the form below.

Alternatively, just call +44 (0) 1933 461 666 and ask to speak to Shannon.

Shannon O’Connor

BSc (Hons)

Ask the Expert

If you’re interested in the products shown here, or can’t find exactly what you need, please get in touch with our specialist through the form below.

Alternatively, just call +44 (0) 1933 461 666 and ask to speak to Sarah.

Sarah Hampson

PhD, MChem (Hons), MRSC

What's New?

We’ve recently refreshed our website, and we hope that you will find the changes to be a big improvement. We’ve worked hard to make it easier to navigate the site, and to find exactly what you need from among our vast and diverse range of products.

Missing e-commerce?

One thing that we’ve not carried over from the previous site at this time is the facility to order online for a select range of our products, which you may have been used to in the past. “Off-the-shelf” items represent a small part of our product range; most often a purchase requires a more in-depth discussion between our sales team and the customer to match the right product to the user’s application. For this reason we have focussed on making it as easy as possible to request a quotation from our sales team.

Please rest assured that we will get back to you with pricing promptly, and will work with you to make sure the products you buy are exactly what you need. Once you’re ready to order, our sales team will work through the process with you, to make it as seamless as possible.

Once you’ve selected all the items you’re interested in, by clicking “Add to Quote” on the product page, just click “View Quote Request List” or the icon in the top navigation bar, check your list, set quantities, complete your details and submit the form. Our sales team will respond by email, in a timely manner.

If you have any other questions in the meantime, please get in touch directly.