Laser 2000 OEM laser sensor Disks and laser heads are based on high sensitivity thermopiles. They have resistant materials and coatings that extend their applicability from UV to Far Infrared and to concentrated beams, without damaging even at extreme power densities.
These thermopiles also exhibit a high degree of linearity over their entire working range and have large areas to sample the whole laser beam.
- Slim design for installation in tight areas
- Flexibility in integration: various connection types, models with / without ampl circuits; cased/non-cased solutions
- Coatings with high power densities for any application
- Usable with Customers’ own electronics or software
- NIST & PTB traceable calibration procedures
Custom sensors, housings and electronics can be designed to fit your requirements – please ask for details.
| General Characteristics |
| Cable Length: |
1.2cm – flying leads |
| Cooling: |
Air cooled heat sink |
| Dimensions: |
44 x 3mm |
| Weight: |
0.008kg |
| Aperture Diameter: |
25mm / 20mm |
Coating Specs
| Absorber Specs |
| Absorber Spectral Range: |
0.19 – 11 µm |
| Calibration Spectral Range: |
0.19 – 2.1 µm, 2.94 µm, 9 – 11 µm |
| Max. Energy Density: |
5ms pulse width: 36 J/cm², 10µs pulse width: 1.2 J/cm², 10ns pulse width: 0.3 J/cm² [1] |
| Max. Power Density: |
18 kW/cm² @10 W [1] – 11 kW/cm² @ 40000 mW [1] |
| Type: |
HPB |
| Absorber Specs |
| Absorber Spectral Range: |
0.19 – 25 µm |
| Calibration Spectral Range: |
0.19 – 2.1 µm, 2.94 µm, 9 – 11 µm |
| Max. Energy Density: |
5ms pulse width: 3.6 J/cm², 10µs pulse width: 0.2 J/cm², 10ns pulse width: 0.1 J/cm² [1] |
| Max. Power Density: |
200 W/cm² [1] |
| Type: |
BBF |
Power Specs
20
| Power Mode |
| Max Average Power: |
2000mW |
| Noise Equivalent Power (NEP): |
3mW |
| Nominal Sensitivity: |
1.8mV/W |
| Power Linearity: |
± 1% [2] |
| Response Time: |
(0 – 90%) <1 sec (accelerated by Laserpoint electronics) |
50
| Power Mode |
| Max Average Power: |
50000mW |
| Noise Equivalent Power (NEP): |
4mW |
| Nominal Sensitivity: |
1.1mV/W |
| Power Linearity: |
± 1% [2] |
| Response Time: |
(0 – 90%) <1 sec (accelerated by Laserpoint electronics) |
200
| Power Mode |
| Max Average Power: |
200000mW |
[1] Damage thresholds also depend on power level.
[2] Detector centrally irradiated @ 50% of useful surface.
