Laser 2000

Line Laser Profiling System

Line laser profiling system allowing for direct measurement of line lasers.
Up to 200 mm in length and down to 55 μm in width.

We offer a solution for direct measurements and analysis of line lasers up to 200 mm in length and down to 55 microns in thickness. Our line laser profiling functionality is included in our full-featured, user-centric software. The software automatically moves our flagship WinCamD-LCM beam profiling camera across the length of the line laser output using a 50 or 200 mm linear stage to capture and analyze the entire beam. The DataRay software compensates for any residual sensor tilt to ensure the most accurate measurement.

A full image of the line laser intensity distribution is provided along with a vertical centroid plot, line width plot, intensity plots, and several other useful metrics. The software enables the user to generate annotated PDF reports as well as to export the raw data.

Figure 1: Line laser with edges physically blocked to reduce it to 28 mm in length. The diffraction seen near the edges is due to the physical blocking of the line laser; this can be observed with the DataRay software (Figure 3).

Figure 2: Line Laser Profiling System Dialog measuring 200 mm of a line laser

Figure 3: The characteristic pattern of edge diffraction from our physically truncated line laser in Figure 1 can be viewed in the Normalized Summed Intensity plot in red (second plot is zoomed). The red line is the summed intensity of each column and the green line is the peak intensity of each column.

Showing the single result

10 per page
Showing 1 – 1 of 1 results Showing all 1 results Showing one result No results found, please broaden your parameters, or get in touch.
Filters Sort results
Reset Apply
Products
Product Code
Description
Direct measurement of line lasers up to 200 mm in length. 190 to 1150 nm (model-dependent) Line laser length/width measurements Absolute vertical centroids Deviation of vertical centroids from a linear regression line Line tilt measured in degrees
Read more...

Laser 2000 works in partnership with DataRay Inc. to offer a wide range of products and services designed to deliver high-quality, affordable, and reliable instrumentation to the photonics industry. Product lines include CMOS and VOx microbolometer based beam profiling cameras (covering wavelength range 190 nm to 16 μm, model-dependent), and scanning slit beam profilers (covering wavelength range 190 nm to 2.5 μm, model-dependent).

The DataRay advantage:

  • Broad applications – Products featuring: 0.1 µm best resolution; 2 µm minimum diameter; beam dimensions to 25 mm; SuperSpeed USB 3.0
  • Wide bandwidth – DataRay’s product portfolio covers wavelengths from deep UV to FIR
  • No hidden costs of ownership – All DataRay beam profiling systems include a 3-year warranty (unless otherwise stated); any necessary servicing within this period is at no charge, including parts and labour (excluding damage by customer)
  • ISO 11146 compliant beam profiling – DataRay uses XY plane scanning slit motions which strictly comply with the standard’s requirement for a slit or knife-edge scan to be made in a plane perpendicular to the propagation axis
  • Free, user-friendly software – Fully functional and versatile software with unlimited installs and free downloadable updates for the life of your product
BACK
TO TOP

Ask the Expert

For over 30 years, Laser 2000 has supplied fibre optic equipment and worked with global partners like VIAVI Solutions, US Conec and INNO Instrument.

For more information on our fibre optic technology and our wide range of products, please visit our Laser 2000 Networks website, or get in touch with our specialist through the form below.

Alternatively, just call +44 (0) 1933 461 666 and ask to speak to Mike.

Mike Fletcher

BSc (Hons)

Ask the Expert

If you’re interested in the products shown here, or have questions about something you can’t find on our website, please get in touch through the form below.

Our knowledgeable sales team will be happy to help. We can normally source exactly what you need, or work with you to come up with custom solutions.

Alternatively, just call +44 (0) 1933 461 666 and ask to speak to the Photonics team.

Ask the Expert

If you’re interested in the products shown here, or can’t find exactly what you need, please get in touch with our specialist through the form below.

Alternatively, just call +44 (0) 1933 461 666 and ask to speak to Toby.

Toby Scrivener

MPhys (Hons)

Ask the Expert

If you’re interested in the products shown here, or can’t find exactly what you need, please get in touch with our specialist through the form below.

Alternatively, just call +44 (0) 1933 461 666 and ask to speak to Karen.

Karen McGeachy West

MPhys (Hons)

Ask the Expert

If you’re interested in the products shown here, or can’t find exactly what you need, please get in touch with our specialist through the form below.

Alternatively, just call +44 (0) 1933 461 666 and ask to speak to Peter.

Peter Collins

BEng (Hons), MSc (Eng)

Ask the Expert

If you’re interested in the products shown here, or can’t find exactly what you need, please get in touch with our specialist through the form below.

Alternatively, just call +44 (0) 1933 461 666 and ask to speak to Sian.

Siân Brooks

BSc (Hons)

Ask the Expert

If you’re interested in the products shown here, or can’t find exactly what you need, please get in touch with our specialist through the form below.

Alternatively, just call +44 (0) 1933 461 666 and ask to speak to Dan.

Dan Young

BSc (Hons)

Ask the Expert

If you’re interested in the products shown here, or can’t find exactly what you need, please get in touch with our specialist through the form below.

Alternatively, just call +44 (0) 1933 461 666 and ask to speak to Paul.

Paul Williams

PhD

Ask the Expert

If you’re interested in the products shown here, or can’t find exactly what you need, please get in touch with our specialist through the form below.

Alternatively, just call +44 (0) 1933 461 666 and ask to speak to Lisa.

Lisa Thomson

MPhys

Ask the Expert

If you’re interested in the products shown here, or can’t find exactly what you need, please get in touch with our specialist through the form below.

Alternatively, just call +44 (0) 1933 461 666 and ask to speak to Alex.

Alex Elliott

MPhys (Hons)

Ask the Expert

If you’re interested in the products shown here, or can’t find exactly what you need, please get in touch with our specialist through the form below.

Alternatively, just call +44 (0) 1933 461 666 and ask to speak to Shannon.

Shannon O’Connor

BSc (Hons)

Ask the Expert

If you’re interested in the products shown here, or can’t find exactly what you need, please get in touch with our specialist through the form below.

Alternatively, just call +44 (0) 1933 461 666 and ask to speak to Sarah.

Sarah Hampson

PhD, MChem (Hons), MRSC

What's New?

We’ve recently refreshed our website, and we hope that you will find the changes to be a big improvement. We’ve worked hard to make it easier to navigate the site, and to find exactly what you need from among our vast and diverse range of products.

Missing e-commerce?

One thing that we’ve not carried over from the previous site at this time is the facility to order online for a select range of our products, which you may have been used to in the past. “Off-the-shelf” items represent a small part of our product range; most often a purchase requires a more in-depth discussion between our sales team and the customer to match the right product to the user’s application. For this reason we have focussed on making it as easy as possible to request a quotation from our sales team.

Please rest assured that we will get back to you with pricing promptly, and will work with you to make sure the products you buy are exactly what you need. Once you’re ready to order, our sales team will work through the process with you, to make it as seamless as possible.

Once you’ve selected all the items you’re interested in, by clicking “Add to Quote” on the product page, just click “View Quote Request List” or the icon in the top navigation bar, check your list, set quantities, complete your details and submit the form. Our sales team will respond by email, in a timely manner.

If you have any other questions in the meantime, please get in touch directly.