Laser 2000
Home > Products > Manual & Motorised Motion > Systems, Controllers & Accessories > Micromanipulators > Motorized micromanipulators with Auto Detect

Motorized micromanipulators with Auto Detect

Select from the options below to find the model that’s right for you.

Please see the Series Specs tab for common specs for the M-LSM series, and refer to the Options tab for further details of each model.

Zaber Technologies Logo
  • 25 mm travel XYZ with resolution finer than 0.05 µm
  • Up to 14 mm/s speed and 15 N thrust
  • Adjustable probe holder
  • Programmable or joystick-activated 4th virtual axis to allow approach along probe angle
  • Plug and play controllers and Joystick included

Features:

1. Joystick control in velocity mode.
2. Right and left hand configurations available.
3. Probe can be rotated 360 degrees and easily locked in position.
4. Probe holder can mount probes of 2 to 13 mm diameter.
5. Post mount or optical breadboard mounting options available.
6. Supports both metric and imperial mounting hardware.
7. Computer-controlled motion possible in a range of programming languages.

Zaber Technologies’ motorized micromanipulator series of products are stand-alone units that are either joystick or computer controlled. They can be mounted to either metric or imperial optical breadboards, and oriented to the left or to the right.

The micromanipulators’ probe holders are designed to quickly and easily adjust for probe size and angle. The left thumbscrew on the holder adjusts for the size of the probe (diameters between 2 and 13 mm) and locks it into position. The front face of the holder can be rotated to adjust the angle at which a probe is held, and the top thumbscrew locks it into place.

 

 

 

Weight 0.952 kg
CE Compliant

Yes

RoHS Compliant

Yes

Communication Interface

RS-232

Communication Protocol

Zaber Technologies Binary or Zaber Technologies ASCII

Default Resolution

1/64 of a step

Encoder Type

None

Limit or Home Sensing

Magnetic hall sensor

Mechanical Drive System

Precision lead screw

Motor Steps Per Rev

200

Motor type

Stepper (2 phase)

Operating Temperature

0 – 50 °C

Vacuum Compatible

No

Motor Connection

D-sub 15

Guide Type

Needle roller bearing

Linear Motion Per Motor Rev

0.6096

Travel Range

25 mm travel

Resolution Level

fine resolution

Horizontal Runout

< 12 µm

Joystick Control

Velocity Mode

Pitch

0.02 °

Probe Angle Range

360 °

Probe Diameter Range

2-13 mm

Roll

0.02 °

Stage Parallelism

< 25 µm

Vertical Runout

< 8 µm

Yaw

0.03 °

M-LSM025A025A025ALHF-M02T4A-K0058

    M-LSM025A025A025ALHF-M02T4A-K0058 is a kit, comprised of:

    Product CodeQtyDescriptionWeight
    M-LSM025A025A025ALHF-M02T4A1Motorized micromanipulator 3 axis, 25 mm travel, optical breadboard mount, left hand, with Auto Detect (Replaces M-LSM025A025A025ALHF-M02T4)0.952 kg
    PS12-24V30-G1Power Supply, 24 V 3.0 A, compatible with X-Series Products0.44 kg
    PTB22Power terminal block, 2 pin, 5 mm pitch, for use with X-Series devices with custom power supply0.004 kg
    X-DC021Data Cable, 2 ft (0.6 m), for use with all X-Series products0.04 kg
    X-DC061Data Cable, 6 ft (2 m), for use with all X-Series products0.08 kg
    X-SDC1Serial adaptor cable with M8 female plug for X-Series products0.09 kg
    X-USBDC1USB to serial converter cable with M8 female plug for X-Series products0.06 kg

    M-LSM025A025A025ARHF-M02T4A-K0058

      M-LSM025A025A025ARHF-M02T4A-K0058 is a kit, comprised of:

      Product CodeQtyDescriptionWeight
      M-LSM025A025A025ARHF-M02T4A1Motorized micromanipulator 3 axis, 25 mm travel, optical breadboard mount, right hand, with Auto Detect (Replaces M-LSM025A025A025ARHF-M02T4)0.952 kg
      PS12-24V30-G1Power Supply, 24 V 3.0 A, compatible with X-Series Products0.44 kg
      PTB22Power terminal block, 2 pin, 5 mm pitch, for use with X-Series devices with custom power supply0.004 kg
      X-DC021Data Cable, 2 ft (0.6 m), for use with all X-Series products0.04 kg
      X-DC061Data Cable, 6 ft (2 m), for use with all X-Series products0.08 kg
      X-SDC1Serial adaptor cable with M8 female plug for X-Series products0.09 kg
      X-USBDC1USB to serial converter cable with M8 female plug for X-Series products0.06 kg

      M-LSM025A025A025ARHP-M02T4A-K0058

        M-LSM025A025A025ARHP-M02T4A-K0058 is a kit, comprised of:

        Product CodeQtyDescriptionWeight
        M-LSM025A025A025ARHP-M02T4A1Motorized micromanipulator 3 axis, 25 mm travel, optical post mount, right hand, with Auto Detect (Replaces M-LSM025A025A025ARHP-M02T4)0.952 kg
        PS12-24V30-G1Power Supply, 24 V 3.0 A, compatible with X-Series Products0.44 kg
        PTB22Power terminal block, 2 pin, 5 mm pitch, for use with X-Series devices with custom power supply0.004 kg
        X-DC021Data Cable, 2 ft (0.6 m), for use with all X-Series products0.04 kg
        X-DC061Data Cable, 6 ft (2 m), for use with all X-Series products0.08 kg
        X-SDC1Serial adaptor cable with M8 female plug for X-Series products0.09 kg
        X-USBDC1USB to serial converter cable with M8 female plug for X-Series products0.06 kg

        M-LSM025A025A025ALHP-M02T4A-K0058

          M-LSM025A025A025ALHP-M02T4A-K0058 is a kit, comprised of:

          Product CodeQtyDescriptionWeight
          M-LSM025A025A025ALHP-M02T4A1Motorized micromanipulator 3 axis, 25 mm travel, optical post mount, left hand, with Auto Detect (Replaces M-LSM025A025A025ALHP-M02T4)0.952 kg
          PS12-24V30-G1Power Supply, 24 V 3.0 A, compatible with X-Series Products0.44 kg
          PTB22Power terminal block, 2 pin, 5 mm pitch, for use with X-Series devices with custom power supply0.004 kg
          X-DC021Data Cable, 2 ft (0.6 m), for use with all X-Series products0.04 kg
          X-DC061Data Cable, 6 ft (2 m), for use with all X-Series products0.08 kg
          X-JOY31Programmable 3-Axis Joystick0.52 kg
          X-MCB11Stepper Motor Controller, 2 Phase, up to 2.5 A per phase0.24 kg
          X-SDC1Serial adaptor cable with M8 female plug for X-Series products0.09 kg
          X-USBDC1USB to serial converter cable with M8 female plug for X-Series products0.06 kg
          M-LSM-Series-Datasheet
          Zaber-CE-Declaration-of-Conformity-Machinery
          Zaber-CE-Declaration-of-Conformity-EMC
          Getting-started-guide
          BACK
          TO TOP

          Request a Demo

          M-LSM Series

          Ask the Expert

          If you’re interested in the products shown here, or have questions about something you can’t find on our website, please get in touch through the form below.

          Our knowledgeable sales team will be happy to help. We can normally source exactly what you need, or work with you to come up with custom solutions.

          Alternatively, just call +44 (0) 1933 461 666 and ask to speak to the Photonics team.