Laser 2000

Low vacuum miniature motorized linear stages

Select from the options below to find the model that’s right for you.

Please see the Series Specs tab for common specs for the LSM-V1 series, and refer to the Options tab for further details of each model.

Zaber Technologies Logo

  • Vacuum compatible to 10-3 Torr
  • 25, 50, 100, 150, 200 mm travel
  • 10 kg load capacity
  • Up to 100 mm/s speed and up to 35 N thrust
  • Only 7 feedthrough wires required to control these units
  • Designed for use with a X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
  • Custom versions available

Features:

1. Only 7 feedthrough wires required to control this units.
2. 200 step per revolution stepper motor, microstepped up to 256x to provide smooth and precise motion.
3. Low vacuum compatible stepper motors rated to 10-3 Torr.
4. Stage top supports metric M3 and M6 threaded holes with M4 centre mount and can be removed for lower XY profile.
5. Travel lengths from 25 to 200 mm, with custom lengths available.
6. Innovative design allows for superior speed & load capabilities; up to 100 mm/s speed & 10 kg load.
7. Multiple LSM-SV1 stages can be assembled in XY or XYZ configurations without additional hardware.

Zaber Technologies’ LSM-V1 Series devices are low-vacuum compatible, computer-controlled, motorized linear stages with high thrust and speed capabilities, and a compact size.

 

Zaber Technologies ASCII Protocol Manual (Wiki)
Zaber Technologies Binary Protocol Manual (Wiki)

Axes of Motion

1

Built-in Controller

No

CE Compliant

Yes

Encoder Type

None

Guide Type

Needle roller bearing

Inductance

3.5 mH/phase

Limit or Home Sensing

Magnetic hall sensor

Maximum Centered Load

100 N

Motor Rated Current

800 mA/phase

Motor Steps Per Rev

200

Motor type

Stepper (2 phase)

Mounting Interface

M3 and M6 threaded holes and M4 threaded center hole

Operating Temperature

0 – 50 °C

RoHS Compliant

Yes

Stage Parallelism

< 25 µm

Vacuum Compatible

Low vacuum (10-3 Torr)

Travel Range

25 mm travel, 50 mm travel, 100 mm travel, 150 mm travel, 200 mm travel

Maximum Cantilever Load

300 N·cm

Data Cable Connection

Teflon flying leads with D-sub15 connector

Default Resolution

1/64 of a step

Manual Control

No

Stiffness in Pitch

55 N·m/deg

Stiffness in Roll

52.5 N·m/deg

Stiffness in Yaw

85 N·m/deg

LSM025A-V1T4-MC03

  • Accuracy (unidirectional): 15 µm
  • Backlash: < 12 µm
  • Horizontal Runout: < 12 µm
  • Linear Motion Per Motor Rev: 0.6096
  • Maximum Speed: 24 mm/s
  • Microstep Size (Default Resolution): 0.047625
  • Minimum Speed: 0.000029 mm/s
  • Peak Thrust: 35 N
  • Pitch: 0.02 °
  • Repeatability: < 3 µm
  • Roll: 0.02 °
  • Speed Resolution: 0.000029 mm/s
  • Travel Range: 25.4 mm
  • Vertical Runout: < 8 µm
  • Weight: 0.39 kg
  • X - Travel Range: 25 mm travel
  • Y - Resolution Level: fine resolution
  • Yaw: 0.03 °

LSM025A-V1T4-MC03 is a kit, comprised of:

Product CodeQtyDescriptionWeight
LSM025A-V1T41Low vacuum, motorized linear stage, 25 mm travel, fine resolution, low speed0.39 kg
MC031Motor extension cable, 5 ft, for use with A- and X-Series controllers0.173 kg

LSM025B-V1T4-MC03

  • Accuracy (unidirectional): 15 µm
  • Backlash: < 16 µm
  • Horizontal Runout: < 12 µm
  • Linear Motion Per Motor Rev: 2.4384
  • Maximum Speed: 100 mm/s
  • Microstep Size (Default Resolution): 0.1905
  • Minimum Speed: 0.000116 mm/s
  • Peak Thrust: 15 N
  • Pitch: 0.02 °
  • Repeatability: < 6 µm
  • Roll: 0.02 °
  • Speed Resolution: 0.000116 mm/s
  • Travel Range: 25.4 mm
  • Vertical Runout: < 8 µm
  • Weight: 0.39 kg
  • Y - Resolution Level: medium resolution
  • Yaw: 0.03 °

LSM025B-V1T4-MC03 is a kit, comprised of:

Product CodeQtyDescriptionWeight
LSM025B-V1T41Low vacuum, motorized linear stage, 25 mm travel, medium resolution, medium speed0.39 kg
MC031Motor extension cable, 5 ft, for use with A- and X-Series controllers0.173 kg

LSM050A-V1T4-MC03

  • Accuracy (unidirectional): 20 µm
  • Backlash: < 12 µm
  • Horizontal Runout: < 14 µm
  • Linear Motion Per Motor Rev: 0.6096
  • Maximum Speed: 24 mm/s
  • Microstep Size (Default Resolution): 0.047625
  • Minimum Speed: 0.000029 mm/s
  • Peak Thrust: 35 N
  • Pitch: 0.03 °
  • Repeatability: < 3 µm
  • Roll: 0.03 °
  • Speed Resolution: 0.000029 mm/s
  • Travel Range: 50.8 mm
  • Vertical Runout: < 11 µm
  • Weight: 0.40 kg
  • X - Travel Range: 50 mm travel
  • Yaw: 0.03 °

LSM050A-V1T4-MC03 is a kit, comprised of:

Product CodeQtyDescriptionWeight
LSM050A-V1T41Low vacuum, motorized linear stage, 50 mm travel, fine resolution, low speed0.40 kg
MC031Motor extension cable, 5 ft, for use with A- and X-Series controllers0.173 kg

LSM050B-V1T4-MC03

  • Accuracy (unidirectional): 25 µm
  • Backlash: < 16 µm
  • Horizontal Runout: < 14 µm
  • Linear Motion Per Motor Rev: 2.4384
  • Maximum Speed: 100 mm/s
  • Microstep Size (Default Resolution): 0.1905
  • Minimum Speed: 0.000116 mm/s
  • Peak Thrust: 15 N
  • Pitch: 0.03 °
  • Repeatability: < 6 µm
  • Roll: 0.03 °
  • Speed Resolution: 0.000116 mm/s
  • Travel Range: 50.8 mm
  • Vertical Runout: < 11 µm
  • Weight: 0.40 kg
  • Yaw: 0.03 °

LSM050B-V1T4-MC03 is a kit, comprised of:

Product CodeQtyDescriptionWeight
LSM050B-V1T41Low vacuum, motorized linear stage, 50 mm travel, medium resolution, medium speed0.40 kg
MC031Motor extension cable, 5 ft, for use with A- and X-Series controllers0.173 kg

LSM100A-V1T4-MC03

  • Accuracy (unidirectional): 35 µm
  • Backlash: < 12 µm
  • Horizontal Runout: < 18 µm
  • Linear Motion Per Motor Rev: 0.6096
  • Maximum Speed: 24 mm/s
  • Microstep Size (Default Resolution): 0.047625
  • Minimum Speed: 0.000029 mm/s
  • Peak Thrust: 35 N
  • Pitch: 0.04 °
  • Repeatability: < 3 µm
  • Roll: 0.04 °
  • Speed Resolution: 0.000029 mm/s
  • Travel Range: 101.6 mm
  • Vertical Runout: < 18 µm
  • Weight: 0.43 kg
  • X - Travel Range: 100 mm travel
  • Yaw: 0.04 °

LSM100A-V1T4-MC03 is a kit, comprised of:

Product CodeQtyDescriptionWeight
LSM100A-V1T41Low vacuum, motorized linear stage, 100 mm travel, fine resolution, low speed0.43 kg
MC031Motor extension cable, 5 ft, for use with A- and X-Series controllers0.173 kg

LSM100B-V1T4-MC03

  • Accuracy (unidirectional): 45 µm
  • Backlash: < 16 µm
  • Horizontal Runout: < 18 µm
  • Linear Motion Per Motor Rev: 2.4384
  • Maximum Speed: 100 mm/s
  • Microstep Size (Default Resolution): 0.1905
  • Minimum Speed: 0.000116 mm/s
  • Peak Thrust: 15 N
  • Pitch: 0.04 °
  • Repeatability: < 6 µm
  • Roll: 0.04 °
  • Speed Resolution: 0.000116 mm/s
  • Travel Range: 101.6 mm
  • Vertical Runout: < 18 µm
  • Weight: 0.43 kg
  • Yaw: 0.04 °

LSM100B-V1T4-MC03 is a kit, comprised of:

Product CodeQtyDescriptionWeight
LSM100B-V1T41Low vacuum, motorized linear stage, 100 mm travel, medium resolution, medium speed0.43 kg
MC031Motor extension cable, 5 ft, for use with A- and X-Series controllers0.173 kg

LSM150A-V1T4-MC03

  • Accuracy (unidirectional): 50 µm
  • Backlash: < 12 µm
  • Horizontal Runout: < 23 µm
  • Linear Motion Per Motor Rev: 0.6096
  • Maximum Speed: 24 mm/s
  • Microstep Size (Default Resolution): 0.047625
  • Minimum Speed: 0.000029 mm/s
  • Peak Thrust: 35 N
  • Pitch: 0.04 °
  • Repeatability: < 3 µm
  • Roll: 0.05 °
  • Speed Resolution: 0.000029 mm/s
  • Travel Range: 152.4 mm
  • Vertical Runout: < 25 µm
  • Weight: 0.47 kg
  • X - Travel Range: 150 mm travel
  • Yaw: 0.05 °

LSM150A-V1T4-MC03 is a kit, comprised of:

Product CodeQtyDescriptionWeight
LSM150A-V1T41Low vacuum, motorized linear stage, 150 mm travel, fine resolution, low speed0.47 kg
MC031Motor extension cable, 5 ft, for use with A- and X-Series controllers0.173 kg

LSM150B-V1T4-MC03

  • Accuracy (unidirectional): 65 µm
  • Backlash: < 16 µm
  • Horizontal Runout: < 23 µm
  • Linear Motion Per Motor Rev: 2.4384
  • Maximum Speed: 100 mm/s
  • Microstep Size (Default Resolution): 0.1905
  • Minimum Speed: 0.000116 mm/s
  • Peak Thrust: 15 N
  • Pitch: 0.04 °
  • Repeatability: < 6 µm
  • Roll: 0.05 °
  • Speed Resolution: 0.000116 mm/s
  • Travel Range: 152.4 mm
  • Vertical Runout: < 25 µm
  • Weight: 0.47 kg
  • Yaw: 0.05 °

LSM150B-V1T4-MC03 is a kit, comprised of:

Product CodeQtyDescriptionWeight
LSM150B-V1T41Low vacuum, motorized linear stage, 150 mm travel, medium resolution, medium speed0.47 kg
MC031Motor extension cable, 5 ft, for use with A- and X-Series controllers0.173 kg

LSM200A-V1T4-MC03

  • Accuracy (unidirectional): 60 µm
  • Backlash: < 12 µm
  • Horizontal Runout: < 27 µm
  • Linear Motion Per Motor Rev: 0.6096
  • Maximum Speed: 24 mm/s
  • Microstep Size (Default Resolution): 0.047625
  • Minimum Speed: 0.000029 mm/s
  • Peak Thrust: 35 N
  • Pitch: 0.04 °
  • Repeatability: < 3 µm
  • Roll: 0.05 °
  • Speed Resolution: 0.000029 mm/s
  • Travel Range: 203.2 mm
  • Vertical Runout: < 32 µm
  • Weight: 0.50 kg
  • X - Travel Range: 200 mm travel
  • Yaw: 0.05 °

LSM200A-V1T4-MC03 is a kit, comprised of:

Product CodeQtyDescriptionWeight
LSM200A-V1T41Low vacuum, motorized linear stage, 200 mm travel, fine resolution, low speed0.50 kg
MC031Motor extension cable, 5 ft, for use with A- and X-Series controllers0.173 kg

LSM200B-V1T4-MC03

  • Accuracy (unidirectional): 85 µm
  • Backlash: < 16 µm
  • Horizontal Runout: < 27 µm
  • Linear Motion Per Motor Rev: 2.4384
  • Maximum Speed: 100 mm/s
  • Microstep Size (Default Resolution): 0.1905
  • Minimum Speed: 0.000116 mm/s
  • Peak Thrust: 15 N
  • Pitch: 0.04 °
  • Repeatability: < 6 µm
  • Roll: 0.05 °
  • Speed Resolution: 0.000116 mm/s
  • Travel Range: 203.2 mm
  • Vertical Runout: < 32 µm
  • Weight: 0.50 kg
  • Yaw: 0.05 °

LSM200B-V1T4-MC03 is a kit, comprised of:

Product CodeQtyDescriptionWeight
LSM200B-V1T41Low vacuum, motorized linear stage, 200 mm travel, medium resolution, medium speed0.50 kg
MC031Motor extension cable, 5 ft, for use with A- and X-Series controllers0.173 kg
Zaber-CE-Declaration-of-Conformity-Machinery
Zaber-CE-Declaration-of-Conformity-EMC
Getting-started-guide
BACK
TO TOP

Request a Demo

LSM-V1 Series

Ask the Expert

If you’re interested in the products shown here, or have questions about something you can’t find on our website, please get in touch through the form below.

Our knowledgeable sales team will be happy to help. We can normally source exactly what you need, or work with you to come up with custom solutions.

Alternatively, just call +44 (0) 1933 461 666 and ask to speak to the Photonics team.

Days
Hours
Minutes
Seconds

Register now to get your FREE ebook!