Laser 2000

Lapping (Partly Crossed Roller)

KSW

We offer the KSW series for lapping (partly crossed roller) guide rotation stages, perfect for angular adjust of high loads over the full 360° rotation. For more information or specifications, please check our specifications tab below or contact our experts.

Rotation Stages (Worm Nut and Gear Drive)

An integrated worm gear drive makes these rotation stages are capable of precise adjustment over a full 360°rotation.

  • The through hole at the center of the stage can be used as a transmission hole.
  • In order to switch coarse / fine adjustment, please use a set screw inside of the side surface of the rotation stage. (The location of the set screw is indicated by ▽ mark.)

KSW Specifications

Part Number Metric KSW-656-M6 KSW-1006 KSW-1206 KSW-1206-M6
Part Number Inch KSW-656UU KSW-1206UU
Stage Size [mm] φ65mm φ84mm φ120mm φ120mm
Rotation Range [ ° ] Coarse: 360°
Fine: 360°

Fine: 360°
Coarse: 360°
Fine: 360°
Coarse: 360°
Fine: 360°
Guide Method Lapping method Lapping method Cross Roller Cross Roller
Primary Material Brass Aluminum Brass
Finish Super black chrome Black anodized Super black chrome
Load Capacity [N] 98.0 (10.0kgf) 78.4 (8.0kgf) 196.0 (20.0kgf) 196.0 (20.0kgf)
Max. Moment Capacity [N・m] Pitch 0.49 1.0 9.8 9.8
Moment Stiffness [″/N・cm] Pitch 0.9 0.5 0.15 0.15
Parallelism [μm] 50 70 30 30
Eccentricity [μm] 20 20 30 30
Wobble [μm] 20 20 30 30
Weight [kg] 0.6 0.62 2.2 2.2

 

KSW Datasheet
BACK
TO TOP

Request a Demo

KSW

Ask the Expert

If you’re interested in the products shown here, or have questions about something you can’t find on our website, please get in touch through the form below.

Our knowledgeable sales team will be happy to help. We can normally source exactly what you need, or work with you to come up with custom solutions.

Alternatively, just call +44 (0) 1933 461 666 and ask to speak to the Photonics team.