The C12741-11 is a near-infrared camera that employs a 640 × 512 pixel InGaAs sensor. -70 ˚C peltier cooling significantly reduces dark current which leads to improved image quality and allows imaging with long exposure time.
Unlike CCD or CMOS cameras, the C12741-11 can detect weak IR light with a high signal to noise ratio.
Features
- Resolution: 640 × 512 pixels
- Low dark current with -70 °C peltier cooling (water cooling)
- Interchangeable between air/water cooling
Applications
- Solar cell evaluation
- Semiconductor failure analysis
- LED failure analysis
- EL/PL image acquisition
- Optical communication device analysis
- Non-invasive in-vivo imaging
| Type number |
C12741-11 |
| Imaging device |
InGaAs sensor |
| Effective no. of pixels |
640 (H)×512 (V) |
| Cell size |
20 μm × 20 μm |
| Effective area |
12.8 mm (H) × 10.24 mm (V) |
| Full well capacity |
300 000 electrons |
| Readout speed |
7.2 frames/s |
| Readout noise |
500 electrons (rms: typ.) |
| Exposure time |
138.5 ms to 10 s (at Rolling shutter mode)
100 μs to 10 s (at Global shutter mode) |
| Cooling method |
Forced-air cooled / Water cooled |
| Cooling temperature |
−60 °C (Forced-air cooled)
−70 °C (Water cooled) |
| Dark current |
300 electrons/pixel/s (Air cooled (cooling temperature: -60 °C) typ.)
130 electrons/pixel/s (Water cooled (cooling temperature: -70 °C) typ.) |
| Binning |
2 × 2 , 4 × 4 |
| Camera control |
CameraLink |
| External trigger mode |
Edge trigger, Level trigger, Start trigger |
| External trigger input |
Yes |
| External trigger signal routing |
SMA / CameraLink I/F |
| Trigger delay function |
0 to 10 s (in 10 μs steps) |
| Trigger output |
3 programmable timing outputs, Trigger ready output, Global exposure timing output |
| External signal output routing |
SMA |
| Image processing functions |
Background subtraction, Shading correction |
| External control interface |
CameraLink |
| Interface |
CameraLink base configuration |
| Software interface |
DCAM-SDK |
| Connector |
Mini-Camera Link |
| A/D converter |
16 bit |
| Lens mount |
C-mount |
| Power supply |
AC 100 V to AC 240 V, 50 Hz/60 Hz |
| Power consumption |
Approx. 150 VA |
| Ambient operating temperature |
0 °C to ＋40 °C * |
| Performance guaranteed temperature |
0 ˚C to +40 ˚C |
| Ambient storage temperature |
-10 °C to ＋50 °C |
| Ambient operating humidity |
30 % to 80 % (Forced-air cooled with no condensation) |
| Ambient storage humidity |
90 % max. (with no condensation) |
* Depend on the exposure time or ambient temperature, brighter or darker pixels than surrounding area or uneven pattern may appear in the image. It comes from the characteristics of InGaAs sensor and not the defects or failure of the camera.
