- 50 N load capacity
- 0.02° repeatability
- 21 mm total height
- 4 mm aperture
- Worm gear driven for continuous rotation
- Designed for use with an X-MCC Series stepper motor controller or any 2-phase stepper motor controller
- With Auto Detect, the X-MCC controller configures its settings automatically for the connected peripheral
Features:
1. 200 step per revolution stepper motor, microstepped up to 256x to provide smooth and precise motion.
2. The interlocking alignment system makes it easy to set up a gimbal system.
3. M2 (20 mm pattern) and M3 (32 mm pattern) mounting holes provided.
4. DB15 male connector for quick connection and automatic detection with Zaber Technologies’ X-MCC single or multi-axis controllers.
5. An additional knob for coarse positioning without power.
Zaber Technologies’ RSM Series rotation stages are our most compact stepper and worm gear driven devices. Self-aligning feet and mounting points make it easy to set up multi-axis tilt or gimbal systems using the GSM tilt devices or AP146 and AB147 brackets.
RSM stages are designed to interface with our X-MCC Series universal motor controllers. Set up is easy with Auto Detect. Once connected, the X-MCC controller will automatically detect and configure the RSM.