Laser 2000
Home > Products > Manual & Motorised Motion > Motorised Linear & Vertical Stages > Linear Stages with Built-in Controller & Encoder > High-load, closed-loop stages with built-in stepper motors, motor encoders, controllers, and dust covers

High-load, closed-loop stages with built-in stepper motors, motor encoders, controllers, and dust covers

Select from the options below to find the model that’s right for you.

Please see the Series Specs tab for common specs for the X-LRT-EC series, and refer to the Options tab for further details of each model.

Zaber Technologies Logo

 

  • 100, 250, 500, 750, 1000, 1500 mm travel
  • 500 kg load capacity
  • High cantilever stiffness
  • Up to 700 mm/s speed and up to 1200 N thrust
  • Built-in controller; daisy-chains with other Zaber Technologies products
  • Built-in, 400 CPR, motor encoder provides slip/stall detection and recovery
  • Ball screw and lead screw configurations
  • Includes stainless steel dust covers

 

Features:

1. An indexed knob provides convenient manual control.
2. Integrated motor encoder, stepper motor controller and motor driver allows for easy-to-use control with stall detection.
3. 200 step per revolution stepper motor, microstepped up to 256x to provide smooth and precise motion.
4. Control all units in the daisy-chain via serial port (with a locking X-SDC cable) or USB (with an X-USBDC cable).
5. Daisy-chain additional units with a locking X-DC02 cable or X-DC06 cable. Power can also be shared in the chain.
6. Travel lengths from 100 to 1500 mm, with custom lengths available.
7. Compact recirculating ball bearing design allows for high load capacity and torsional stiffness.
8. Flexible stainless steel dust cover protects internal lead screw and bearings.
9. Multiple X-LRT-EC stages can be assembled directly in XY configuration or XYZ configuration with an AB151 angle bracket.

 

Zaber Technologies’ X-LRT-EC Series devices are computer-controlled, motorized linear stages with high torsional stiffness, load capacity, and long lifetime. They have low pitch, roll, yaw, and runout. A flexible stainless steel dust cover prevents the ingress of small objects. They are stand-alone units requiring only a standard 24 V or 48 V power supply. The built-in motor encoder allows closed-loop operation and slip/stall recovery features. An indexed knob provides convenient manual control for versatile operation even without a computer.

These stages connect to the RS-232 port or USB port of any computer, and they can be daisy-chained with any other Zaber Technologies products. The daisy-chain also shares power, making it possible for multiple X-Series products to share a single power supply. Convenient locking, 4-pin, M8 connectors on the unit allow for secure connection between units.

 

Zaber Technologies ASCII Protocol Manual (Wiki)
Zaber Technologies Binary Protocol Manual (Wiki)
X-LRT-EC Manual (Wiki)

Axes of Motion

1

Built-in Controller

Yes

CE Compliant

Yes

Encoder Type

Rotary quadrature encoder

Guide Type

Recirculating Ball Linear Guide

Inductance

2 mH/phase

Limit or Home Sensing

Magnetic home sensor

Maximum Centered Load

5000 N

Maximum Current Draw

3600 mA

Motor Rated Current

4200 mA/phase

Motor Steps Per Rev

200

Motor type

Stepper (2 phase)

Operating Temperature

0 – 50 °C

RoHS Compliant

Yes

Vacuum Compatible

No

Travel Range

100 mm travel, 250 mm travel, 500 mm travel, 750 mm travel, 1000 mm travel, 1500 mm travel

Communication Interface

RS-232

Communication Protocol

Zaber Technologies ASCII

Data Cable Connection

Locking 4-pin M8

LED Indicators

Yes

Lifetime Factor A

-1057.61

Lifetime Factor B

11246.8

Manual Control

Indexed knob with push switch

Power Plug

2-pin Screw Terminal

Power Supply

24-48 VDC

Stiffness in Pitch

1400 N·m/deg

Stiffness in Roll

700 N·m/deg

Stiffness in Yaw

1200 N·m/deg

Encoder Resolution

400 CPR

X-LRT0100AL-E08C-KX14N

  • Accuracy (unidirectional): 25 µm
  • Backlash: < 6 µm
  • Linear Motion Per Motor Rev: 1.5875
  • Maximum Speed: 45 mm/s
  • Mechanical Drive System: Precision lead screw
  • Microstep Size (Default Resolution): 0.124023438
  • Minimum Speed: 0.0000757 mm/s
  • Peak Thrust: 1200 N
  • Repeatability: < 2 µm
  • Travel Range: 100 mm
  • Weight: 3.65 kg
  • Accuracy: +/- 25
  • Maximum Continuous Thrust: 1200 N
  • Back-driving Force: Non-back-driving,Non-back-driving
  • Kit: Power supply, 48 V 3.75 A

X-LRT0100AL-E08C-KX14N is a kit, comprised of:

Product Code Qty Description Weight
X-LRT0100AL-E08C 1 Motorized, lead-screw driven, covered linear stage, 100 mm travel, integrated motor encoder and controller, fine resolution, low speed 3.65 kg
PS14-48V37-G 1 Power Supply, 48 V 3.75 A, compatible with X-Series Products 0.75 kg
X-DC02 1 Data Cable, 2 ft (0.6 m), for use with all X-Series products 0.04 kg
X-DC02-NP 1 Data cable, no power, 2 ft (0.6 m), for use with all X-Series products 0.040 kg
X-USBDC 1 USB to serial converter cable with M8 female plug for X-Series products 0.06 kg

X-LRT0100AL-E08C-PTB2

  • Accuracy (unidirectional): 25 µm
  • Backlash: < 6 µm
  • Linear Motion Per Motor Rev: 1.5875
  • Maximum Speed: 45 mm/s
  • Mechanical Drive System: Precision lead screw
  • Microstep Size (Default Resolution): 0.124023438
  • Minimum Speed: 0.0000757 mm/s
  • Peak Thrust: 1200 N
  • Repeatability: < 2 µm
  • Travel Range: 100 mm
  • Weight: 3.65 kg
  • X – Travel Range: 100 mm travel
  • Y – Resolution Level: fine resolution
  • Accuracy: +/- 25
  • Maximum Continuous Thrust: 1200 N
  • Back-driving Force: Non-back-driving,Non-back-driving
  • Kit: Stage Only

X-LRT0100AL-E08C-PTB2 is a kit, comprised of:

Product Code Qty Description Weight
X-LRT0100AL-E08C 1 Motorized, lead-screw driven, covered linear stage, 100 mm travel, integrated motor encoder and controller, fine resolution, low speed 3.65 kg
PTB2 1 Power terminal block, 2 pin, 5 mm pitch, for use with X-Series devices with custom power supply 0.004 kg

X-LRT0100BL-E08C-KX14N

  • Accuracy (unidirectional): 25 µm
  • Backlash: < 10 µm
  • Linear Motion Per Motor Rev: 6.35
  • Maximum Speed: 175 mm/s
  • Mechanical Drive System: Precision lead screw
  • Microstep Size (Default Resolution): 0.49609375
  • Minimum Speed: 0.000303 mm/s
  • Peak Thrust: 600 N
  • Repeatability: < 2 µm
  • Travel Range: 100 mm
  • Weight: 3.65 kg
  • Accuracy: +/- 25
  • Maximum Continuous Thrust: 600 N
  • Back-driving Force: 420 N (± 30%)

X-LRT0100BL-E08C-KX14N is a kit, comprised of:

Product Code Qty Description Weight
X-LRT0100BL-E08C 1 Motorized, lead-screw driven, covered linear stage, 100 mm travel, integrated motor encoder and controller, medium resolution, medium speed 3.65 kg
PS14-48V37-G 1 Power Supply, 48 V 3.75 A, compatible with X-Series Products 0.75 kg
X-DC02 1 Data Cable, 2 ft (0.6 m), for use with all X-Series products 0.04 kg
X-DC02-NP 1 Data cable, no power, 2 ft (0.6 m), for use with all X-Series products 0.040 kg
X-USBDC 1 USB to serial converter cable with M8 female plug for X-Series products 0.06 kg

X-LRT0100BL-E08C-PTB2

  • Accuracy (unidirectional): 25 µm
  • Backlash: < 10 µm
  • Linear Motion Per Motor Rev: 6.35
  • Maximum Speed: 175 mm/s
  • Mechanical Drive System: Precision lead screw
  • Microstep Size (Default Resolution): 0.49609375
  • Minimum Speed: 0.000303 mm/s
  • Peak Thrust: 600 N
  • Repeatability: < 2 µm
  • Travel Range: 100 mm
  • Weight: 3.65 kg
  • Y – Resolution Level: medium resolution
  • Accuracy: +/- 25
  • Maximum Continuous Thrust: 600 N
  • Back-driving Force: 420 N (± 30%)

X-LRT0100BL-E08C-PTB2 is a kit, comprised of:

Product Code Qty Description Weight
X-LRT0100BL-E08C 1 Motorized, lead-screw driven, covered linear stage, 100 mm travel, integrated motor encoder and controller, medium resolution, medium speed 3.65 kg
PTB2 1 Power terminal block, 2 pin, 5 mm pitch, for use with X-Series devices with custom power supply 0.004 kg

X-LRT0100DL-E08C-KX14N

  • Accuracy (unidirectional): 25 µm
  • Backlash: < 32 µm
  • Linear Motion Per Motor Rev: 25.4
  • Maximum Speed: 700 mm/s
  • Mechanical Drive System: Precision lead screw
  • Microstep Size (Default Resolution): 1.984375
  • Minimum Speed: 0.00121 mm/s
  • Peak Thrust: 200 N
  • Repeatability: < 4 µm
  • Travel Range: 100 mm
  • Weight: 3.65 kg
  • Accuracy: +/- 25
  • Maximum Continuous Thrust: 200 N
  • Back-driving Force: 40 N (± 30%)

X-LRT0100DL-E08C-KX14N is a kit, comprised of:

Product Code Qty Description Weight
X-LRT0100DL-E08C 1 Motorized, lead-screw driven, covered linear stage, 100 mm travel, integrated motor encoder and controller, coarse resolution, high speed 3.65 kg
PS14-48V37-G 1 Power Supply, 48 V 3.75 A, compatible with X-Series Products 0.75 kg
X-DC02 1 Data Cable, 2 ft (0.6 m), for use with all X-Series products 0.04 kg
X-DC02-NP 1 Data cable, no power, 2 ft (0.6 m), for use with all X-Series products 0.040 kg
X-USBDC 1 USB to serial converter cable with M8 female plug for X-Series products 0.06 kg

X-LRT0100DL-E08C-PTB2

  • Accuracy (unidirectional): 25 µm
  • Backlash: < 32 µm
  • Linear Motion Per Motor Rev: 25.4
  • Maximum Speed: 700 mm/s
  • Mechanical Drive System: Precision lead screw
  • Microstep Size (Default Resolution): 1.984375
  • Minimum Speed: 0.00121 mm/s
  • Peak Thrust: 200 N
  • Repeatability: < 4 µm
  • Travel Range: 100 mm
  • Weight: 3.65 kg
  • Y – Resolution Level: coarse resolution
  • Accuracy: +/- 25
  • Maximum Continuous Thrust: 200 N
  • Back-driving Force: 40 N (± 30%)

X-LRT0100DL-E08C-PTB2 is a kit, comprised of:

Product Code Qty Description Weight
X-LRT0100DL-E08C 1 Motorized, lead-screw driven, covered linear stage, 100 mm travel, integrated motor encoder and controller, coarse resolution, high speed 3.65 kg
PTB2 1 Power terminal block, 2 pin, 5 mm pitch, for use with X-Series devices with custom power supply 0.004 kg

X-LRT0100HL-E08C-KX14N

  • Accuracy (unidirectional): 45 µm
  • Backlash: < 20 µm
  • Linear Motion Per Motor Rev: 5
  • Maximum Speed: 140 mm/s
  • Mechanical Drive System: Precision ball screw
  • Microstep Size (Default Resolution): 0.390625
  • Minimum Speed: 0.000238583 mm/s
  • Peak Thrust: 1200 N
  • Repeatability: < 4 µm
  • Travel Range: 100 mm
  • Weight: 3.65 kg
  • Accuracy: +/- 25
  • Maximum Continuous Thrust: 1200 N
  • Back-driving Force: 157 N (± 30%)

X-LRT0100HL-E08C-KX14N is a kit, comprised of:

Product Code Qty Description Weight
X-LRT0100HL-E08C 1 Motorized, ball-screw driven, covered linear stage, 100 mm travel, integrated motor encoder and controller, medium resolution, medium speed 3.65 kg
PS14-48V37-G 1 Power Supply, 48 V 3.75 A, compatible with X-Series Products 0.75 kg
X-DC02 1 Data Cable, 2 ft (0.6 m), for use with all X-Series products 0.04 kg
X-DC02-NP 1 Data cable, no power, 2 ft (0.6 m), for use with all X-Series products 0.040 kg
X-USBDC 1 USB to serial converter cable with M8 female plug for X-Series products 0.06 kg

X-LRT0100HL-E08C-PTB2

  • Accuracy (unidirectional): 45 µm
  • Backlash: < 20 µm
  • Linear Motion Per Motor Rev: 5
  • Maximum Speed: 140 mm/s
  • Mechanical Drive System: Precision ball screw
  • Microstep Size (Default Resolution): 0.390625
  • Minimum Speed: 0.000238583 mm/s
  • Peak Thrust: 1200 N
  • Repeatability: < 4 µm
  • Travel Range: 100 mm
  • Weight: 3.65 kg
  • Y – Resolution Level: medium resolution, ball-screw driven
  • Accuracy: +/- 25
  • Maximum Continuous Thrust: 1200 N
  • Back-driving Force: 157 N (± 30%)

X-LRT0100HL-E08C-PTB2 is a kit, comprised of:

Product Code Qty Description Weight
X-LRT0100HL-E08C 1 Motorized, ball-screw driven, covered linear stage, 100 mm travel, integrated motor encoder and controller, medium resolution, medium speed 3.65 kg
PTB2 1 Power terminal block, 2 pin, 5 mm pitch, for use with X-Series devices with custom power supply 0.004 kg

X-LRT0250AL-E08C-KX14N

  • Accuracy (unidirectional): 63 µm
  • Backlash: < 6 µm
  • Linear Motion Per Motor Rev: 1.5875
  • Maximum Speed: 45 mm/s
  • Mechanical Drive System: Precision lead screw
  • Microstep Size (Default Resolution): 0.124023438
  • Minimum Speed: 0.0000757 mm/s
  • Peak Thrust: 1200 N
  • Repeatability: < 2 µm
  • Travel Range: 250 mm
  • Weight: 4.441 kg
  • Accuracy: +/- 63
  • Maximum Continuous Thrust: 1200 N
  • Back-driving Force: Non-back-driving,Non-back-driving

X-LRT0250AL-E08C-KX14N is a kit, comprised of:

Product Code Qty Description Weight
X-LRT0250AL-E08C 1 Motorized, lead-screw driven, covered linear stage, 250 mm travel, integrated motor encoder and controller, fine resolution, low speed 4.441 kg
PS14-48V37-G 1 Power Supply, 48 V 3.75 A, compatible with X-Series Products 0.75 kg
X-DC02 1 Data Cable, 2 ft (0.6 m), for use with all X-Series products 0.04 kg
X-DC02-NP 1 Data cable, no power, 2 ft (0.6 m), for use with all X-Series products 0.040 kg
X-USBDC 1 USB to serial converter cable with M8 female plug for X-Series products 0.06 kg

X-LRT0250AL-E08C-PTB2

  • Accuracy (unidirectional): 63 µm
  • Backlash: < 6 µm
  • Linear Motion Per Motor Rev: 1.5875
  • Maximum Speed: 45 mm/s
  • Mechanical Drive System: Precision lead screw
  • Microstep Size (Default Resolution): 0.124023438
  • Minimum Speed: 0.0000757 mm/s
  • Peak Thrust: 1200 N
  • Repeatability: < 2 µm
  • Travel Range: 250 mm
  • Weight: 4.441 kg
  • X – Travel Range: 250 mm travel
  • Accuracy: +/- 63
  • Maximum Continuous Thrust: 1200 N
  • Back-driving Force: Non-back-driving,Non-back-driving

X-LRT0250AL-E08C-PTB2 is a kit, comprised of:

Product Code Qty Description Weight
X-LRT0250AL-E08C 1 Motorized, lead-screw driven, covered linear stage, 250 mm travel, integrated motor encoder and controller, fine resolution, low speed 4.441 kg
PTB2 1 Power terminal block, 2 pin, 5 mm pitch, for use with X-Series devices with custom power supply 0.004 kg

X-LRT0250BL-E08C-KX14N

  • Accuracy (unidirectional): 63 µm
  • Backlash: < 10 µm
  • Linear Motion Per Motor Rev: 6.35
  • Maximum Speed: 175 mm/s
  • Mechanical Drive System: Precision lead screw
  • Microstep Size (Default Resolution): 0.49609375
  • Minimum Speed: 0.000303 mm/s
  • Peak Thrust: 600 N
  • Repeatability: < 2 µm
  • Travel Range: 250 mm
  • Weight: 4.441 kg
  • Accuracy: +/- 63
  • Maximum Continuous Thrust: 600 N
  • Back-driving Force: 420 N (± 30%)

X-LRT0250BL-E08C-KX14N is a kit, comprised of:

Product Code Qty Description Weight
X-LRT0250BL-E08C 1 Motorized, lead-screw driven, covered linear stage, 250 mm travel, integrated motor encoder and controller, medium resolution, medium speed 4.441 kg
PS14-48V37-G 1 Power Supply, 48 V 3.75 A, compatible with X-Series Products 0.75 kg
X-DC02 1 Data Cable, 2 ft (0.6 m), for use with all X-Series products 0.04 kg
X-DC02-NP 1 Data cable, no power, 2 ft (0.6 m), for use with all X-Series products 0.040 kg
X-USBDC 1 USB to serial converter cable with M8 female plug for X-Series products 0.06 kg

X-LRT0250BL-E08C-PTB2

  • Accuracy (unidirectional): 63 µm
  • Backlash: < 10 µm
  • Linear Motion Per Motor Rev: 6.35
  • Maximum Speed: 175 mm/s
  • Mechanical Drive System: Precision lead screw
  • Microstep Size (Default Resolution): 0.49609375
  • Minimum Speed: 0.000303 mm/s
  • Peak Thrust: 600 N
  • Repeatability: < 2 µm
  • Travel Range: 250 mm
  • Weight: 4.441 kg
  • Accuracy: +/- 63
  • Maximum Continuous Thrust: 600 N
  • Back-driving Force: 420 N (± 30%)

X-LRT0250BL-E08C-PTB2 is a kit, comprised of:

Product Code Qty Description Weight
X-LRT0250BL-E08C 1 Motorized, lead-screw driven, covered linear stage, 250 mm travel, integrated motor encoder and controller, medium resolution, medium speed 4.441 kg
PTB2 1 Power terminal block, 2 pin, 5 mm pitch, for use with X-Series devices with custom power supply 0.004 kg

X-LRT0250DL-E08C-KX14N

  • Accuracy (unidirectional): 63 µm
  • Backlash: < 32 µm
  • Linear Motion Per Motor Rev: 25.4
  • Maximum Speed: 700 mm/s
  • Mechanical Drive System: Precision lead screw
  • Microstep Size (Default Resolution): 1.984375
  • Minimum Speed: 0.00121 mm/s
  • Peak Thrust: 200 N
  • Repeatability: < 4 µm
  • Travel Range: 250 mm
  • Weight: 4.441 kg
  • Accuracy: +/- 63
  • Maximum Continuous Thrust: 200 N
  • Back-driving Force: 40 N (± 30%)

X-LRT0250DL-E08C-KX14N is a kit, comprised of:

Product Code Qty Description Weight
X-LRT0250DL-E08C 1 Motorized, lead-screw driven, covered linear stage, 250 mm travel, integrated motor encoder and controller, coarse resolution, high speed 4.441 kg
PS14-48V37-G 1 Power Supply, 48 V 3.75 A, compatible with X-Series Products 0.75 kg
X-DC02 1 Data Cable, 2 ft (0.6 m), for use with all X-Series products 0.04 kg
X-DC02-NP 1 Data cable, no power, 2 ft (0.6 m), for use with all X-Series products 0.040 kg
X-USBDC 1 USB to serial converter cable with M8 female plug for X-Series products 0.06 kg

X-LRT0250DL-E08C-PTB2

  • Accuracy (unidirectional): 63 µm
  • Backlash: < 32 µm
  • Linear Motion Per Motor Rev: 25.4
  • Maximum Speed: 700 mm/s
  • Mechanical Drive System: Precision lead screw
  • Microstep Size (Default Resolution): 1.984375
  • Minimum Speed: 0.00121 mm/s
  • Peak Thrust: 200 N
  • Repeatability: < 4 µm
  • Travel Range: 250 mm
  • Weight: 4.441 kg
  • Accuracy: +/- 63
  • Maximum Continuous Thrust: 200 N
  • Back-driving Force: 40 N (± 30%)

X-LRT0250DL-E08C-PTB2 is a kit, comprised of:

Product Code Qty Description Weight
X-LRT0250DL-E08C 1 Motorized, lead-screw driven, covered linear stage, 250 mm travel, integrated motor encoder and controller, coarse resolution, high speed 4.441 kg
PTB2 1 Power terminal block, 2 pin, 5 mm pitch, for use with X-Series devices with custom power supply 0.004 kg

X-LRT0250HL-E08C-KX14N

  • Accuracy (unidirectional): 113 µm
  • Backlash: < 20 µm
  • Linear Motion Per Motor Rev: 5
  • Maximum Speed: 140 mm/s
  • Mechanical Drive System: Precision ball screw
  • Microstep Size (Default Resolution): 0.390625
  • Minimum Speed: 0.000238583 mm/s
  • Peak Thrust: 1200 N
  • Repeatability: < 4 µm
  • Travel Range: 250 mm
  • Weight: 4.441 kg
  • Accuracy: +/- 63
  • Maximum Continuous Thrust: 1200 N
  • Back-driving Force: 157 N (± 30%)

X-LRT0250HL-E08C-KX14N is a kit, comprised of:

Product Code Qty Description Weight
X-LRT0250HL-E08C 1 Motorized, ball-screw driven, covered linear stage, 250 mm travel, integrated motor encoder and controller, medium resolution, medium speed 4.441 kg
PS14-48V37-G 1 Power Supply, 48 V 3.75 A, compatible with X-Series Products 0.75 kg
X-DC02 1 Data Cable, 2 ft (0.6 m), for use with all X-Series products 0.04 kg
X-DC02-NP 1 Data cable, no power, 2 ft (0.6 m), for use with all X-Series products 0.040 kg
X-USBDC 1 USB to serial converter cable with M8 female plug for X-Series products 0.06 kg

X-LRT0250HL-E08C-PTB2

  • Accuracy (unidirectional): 113 µm
  • Backlash: < 20 µm
  • Linear Motion Per Motor Rev: 5
  • Maximum Speed: 140 mm/s
  • Mechanical Drive System: Precision ball screw
  • Microstep Size (Default Resolution): 0.390625
  • Minimum Speed: 0.000238583 mm/s
  • Peak Thrust: 1200 N
  • Repeatability: < 4 µm
  • Travel Range: 250 mm
  • Weight: 4.441 kg
  • Accuracy: +/- 63
  • Maximum Continuous Thrust: 1200 N
  • Back-driving Force: 157 N (± 30%)

X-LRT0250HL-E08C-PTB2 is a kit, comprised of:

Product Code Qty Description Weight
X-LRT0250HL-E08C 1 Motorized, ball-screw driven, covered linear stage, 250 mm travel, integrated motor encoder and controller, medium resolution, medium speed 4.441 kg
PTB2 1 Power terminal block, 2 pin, 5 mm pitch, for use with X-Series devices with custom power supply 0.004 kg

X-LRT0500AL-E08C-KX14N

  • Accuracy (unidirectional): 125 µm
  • Backlash: < 6 µm
  • Linear Motion Per Motor Rev: 1.5875
  • Maximum Speed: 45 mm/s
  • Mechanical Drive System: Precision lead screw
  • Microstep Size (Default Resolution): 0.124023438
  • Minimum Speed: 0.0000757 mm/s
  • Peak Thrust: 1200 N
  • Repeatability: < 2 µm
  • Travel Range: 500 mm
  • Weight: 5.758 kg
  • Accuracy: +/- 125
  • Maximum Continuous Thrust: 1200 N
  • Back-driving Force: Non-back-driving,Non-back-driving

X-LRT0500AL-E08C-KX14N is a kit, comprised of:

Product Code Qty Description Weight
X-LRT0500AL-E08C 1 Motorized, lead-screw driven, covered linear stage, 500 mm travel, integrated motor encoder and controller, fine resolution, low speed 5.758 kg
PS14-48V37-G 1 Power Supply, 48 V 3.75 A, compatible with X-Series Products 0.75 kg
X-DC02 1 Data Cable, 2 ft (0.6 m), for use with all X-Series products 0.04 kg
X-DC02-NP 1 Data cable, no power, 2 ft (0.6 m), for use with all X-Series products 0.040 kg
X-USBDC 1 USB to serial converter cable with M8 female plug for X-Series products 0.06 kg

X-LRT0500AL-E08C-PTB2

  • Accuracy (unidirectional): 125 µm
  • Backlash: < 6 µm
  • Linear Motion Per Motor Rev: 1.5875
  • Maximum Speed: 45 mm/s
  • Mechanical Drive System: Precision lead screw
  • Microstep Size (Default Resolution): 0.124023438
  • Minimum Speed: 0.0000757 mm/s
  • Peak Thrust: 1200 N
  • Repeatability: < 2 µm
  • Travel Range: 500 mm
  • Weight: 5.758 kg
  • X – Travel Range: 500 mm travel
  • Accuracy: +/- 125
  • Maximum Continuous Thrust: 1200 N
  • Back-driving Force: Non-back-driving,Non-back-driving

X-LRT0500AL-E08C-PTB2 is a kit, comprised of:

Product Code Qty Description Weight
X-LRT0500AL-E08C 1 Motorized, lead-screw driven, covered linear stage, 500 mm travel, integrated motor encoder and controller, fine resolution, low speed 5.758 kg
PTB2 1 Power terminal block, 2 pin, 5 mm pitch, for use with X-Series devices with custom power supply 0.004 kg

X-LRT0500BL-E08C-KX14N

  • Accuracy (unidirectional): 125 µm
  • Backlash: < 10 µm
  • Linear Motion Per Motor Rev: 6.35
  • Maximum Speed: 175 mm/s
  • Mechanical Drive System: Precision lead screw
  • Microstep Size (Default Resolution): 0.49609375
  • Minimum Speed: 0.000303 mm/s
  • Peak Thrust: 600 N
  • Repeatability: < 2 µm
  • Travel Range: 500 mm
  • Weight: 5.758 kg
  • Accuracy: +/- 125
  • Maximum Continuous Thrust: 600 N
  • Back-driving Force: 420 N (± 30%)

X-LRT0500BL-E08C-KX14N is a kit, comprised of:

Product Code Qty Description Weight
X-LRT0500BL-E08C 1 Motorized, lead-screw driven, covered linear stage, 500 mm travel, integrated motor encoder and controller, medium resolution, medium speed 5.758 kg
PS14-48V37-G 1 Power Supply, 48 V 3.75 A, compatible with X-Series Products 0.75 kg
X-DC02 1 Data Cable, 2 ft (0.6 m), for use with all X-Series products 0.04 kg
X-DC02-NP 1 Data cable, no power, 2 ft (0.6 m), for use with all X-Series products 0.040 kg
X-USBDC 1 USB to serial converter cable with M8 female plug for X-Series products 0.06 kg

X-LRT0500BL-E08C-PTB2

  • Accuracy (unidirectional): 125 µm
  • Backlash: < 10 µm
  • Linear Motion Per Motor Rev: 6.35
  • Maximum Speed: 175 mm/s
  • Mechanical Drive System: Precision lead screw
  • Microstep Size (Default Resolution): 0.49609375
  • Minimum Speed: 0.000303 mm/s
  • Peak Thrust: 600 N
  • Repeatability: < 2 µm
  • Travel Range: 500 mm
  • Weight: 5.758 kg
  • Accuracy: +/- 125
  • Maximum Continuous Thrust: 600 N
  • Back-driving Force: 420 N (± 30%)

X-LRT0500BL-E08C-PTB2 is a kit, comprised of:

Product Code Qty Description Weight
X-LRT0500BL-E08C 1 Motorized, lead-screw driven, covered linear stage, 500 mm travel, integrated motor encoder and controller, medium resolution, medium speed 5.758 kg
PTB2 1 Power terminal block, 2 pin, 5 mm pitch, for use with X-Series devices with custom power supply 0.004 kg

X-LRT0500DL-E08C-KX14N

  • Accuracy (unidirectional): 125 µm
  • Backlash: < 32 µm
  • Linear Motion Per Motor Rev: 25.4
  • Maximum Speed: 700 mm/s
  • Mechanical Drive System: Precision lead screw
  • Microstep Size (Default Resolution): 1.984375
  • Minimum Speed: 0.00121 mm/s
  • Peak Thrust: 200 N
  • Repeatability: < 4 µm
  • Travel Range: 500 mm
  • Weight: 5.758 kg
  • Accuracy: +/- 125
  • Maximum Continuous Thrust: 200 N
  • Back-driving Force: 40 N (± 30%)

X-LRT0500DL-E08C-KX14N is a kit, comprised of:

Product Code Qty Description Weight
X-LRT0500DL-E08C 1 Motorized, lead-screw driven, covered linear stage, 500 mm travel, integrated motor encoder and controller, coarse resolution, high speed 5.758 kg
PS14-48V37-G 1 Power Supply, 48 V 3.75 A, compatible with X-Series Products 0.75 kg
X-DC02 1 Data Cable, 2 ft (0.6 m), for use with all X-Series products 0.04 kg
X-DC02-NP 1 Data cable, no power, 2 ft (0.6 m), for use with all X-Series products 0.040 kg
X-USBDC 1 USB to serial converter cable with M8 female plug for X-Series products 0.06 kg

X-LRT0500DL-E08C-PTB2

  • Accuracy (unidirectional): 125 µm
  • Backlash: < 32 µm
  • Linear Motion Per Motor Rev: 25.4
  • Maximum Speed: 700 mm/s
  • Mechanical Drive System: Precision lead screw
  • Microstep Size (Default Resolution): 1.984375
  • Minimum Speed: 0.00121 mm/s
  • Peak Thrust: 200 N
  • Repeatability: < 4 µm
  • Travel Range: 500 mm
  • Weight: 5.758 kg
  • Accuracy: +/- 125
  • Maximum Continuous Thrust: 200 N
  • Back-driving Force: 40 N (± 30%)

X-LRT0500DL-E08C-PTB2 is a kit, comprised of:

Product Code Qty Description Weight
X-LRT0500DL-E08C 1 Motorized, lead-screw driven, covered linear stage, 500 mm travel, integrated motor encoder and controller, coarse resolution, high speed 5.758 kg
PTB2 1 Power terminal block, 2 pin, 5 mm pitch, for use with X-Series devices with custom power supply 0.004 kg

X-LRT0500HL-E08C-KX14N

  • Accuracy (unidirectional): 225 µm
  • Backlash: < 20 µm
  • Linear Motion Per Motor Rev: 5
  • Maximum Speed: 140 mm/s
  • Mechanical Drive System: Precision ball screw
  • Microstep Size (Default Resolution): 0.390625
  • Minimum Speed: 0.000238583 mm/s
  • Peak Thrust: 1200 N
  • Repeatability: < 4 µm
  • Travel Range: 500 mm
  • Weight: 5.758 kg
  • Accuracy: +/- 125
  • Maximum Continuous Thrust: 1200 N
  • Back-driving Force: 157 N (± 30%)

X-LRT0500HL-E08C-KX14N is a kit, comprised of:

Product Code Qty Description Weight
X-LRT0500HL-E08C 1 Motorized, ball-screw driven, covered linear stage, 500 mm travel, integrated motor encoder and controller, medium resolution, medium speed 5.758 kg
PS14-48V37-G 1 Power Supply, 48 V 3.75 A, compatible with X-Series Products 0.75 kg
X-DC02 1 Data Cable, 2 ft (0.6 m), for use with all X-Series products 0.04 kg
X-DC02-NP 1 Data cable, no power, 2 ft (0.6 m), for use with all X-Series products 0.040 kg
X-USBDC 1 USB to serial converter cable with M8 female plug for X-Series products 0.06 kg

X-LRT0500HL-E08C-PTB2

  • Accuracy (unidirectional): 225 µm
  • Backlash: < 20 µm
  • Linear Motion Per Motor Rev: 5
  • Maximum Speed: 140 mm/s
  • Mechanical Drive System: Precision ball screw
  • Microstep Size (Default Resolution): 0.390625
  • Minimum Speed: 0.000238583 mm/s
  • Peak Thrust: 1200 N
  • Repeatability: < 4 µm
  • Travel Range: 500 mm
  • Weight: 5.758 kg
  • Accuracy: +/- 125
  • Maximum Continuous Thrust: 1200 N
  • Back-driving Force: 157 N (± 30%)

X-LRT0500HL-E08C-PTB2 is a kit, comprised of:

Product Code Qty Description Weight
X-LRT0500HL-E08C 1 Motorized, ball-screw driven, covered linear stage, 500 mm travel, integrated motor encoder and controller, medium resolution, medium speed 5.758 kg
PTB2 1 Power terminal block, 2 pin, 5 mm pitch, for use with X-Series devices with custom power supply 0.004 kg

X-LRT0750AL-E08C-KX14N

  • Accuracy (unidirectional): 188 µm
  • Backlash: < 6 µm
  • Linear Motion Per Motor Rev: 1.5875
  • Maximum Speed: 45 mm/s
  • Mechanical Drive System: Precision lead screw
  • Microstep Size (Default Resolution): 0.124023438
  • Minimum Speed: 0.0000757 mm/s
  • Peak Thrust: 1200 N
  • Repeatability: < 2 µm
  • Travel Range: 750 mm
  • Weight: 7.076 kg
  • Accuracy: +/- 188
  • Maximum Continuous Thrust: 1200 N
  • Back-driving Force: Non-back-driving,Non-back-driving

X-LRT0750AL-E08C-KX14N is a kit, comprised of:

Product Code Qty Description Weight
X-LRT0750AL-E08C 1 Motorized, lead-screw driven, covered linear stage, 750 mm travel, integrated motor encoder and controller, fine resolution, low speed 7.076 kg
PS14-48V37-G 1 Power Supply, 48 V 3.75 A, compatible with X-Series Products 0.75 kg
X-DC02 1 Data Cable, 2 ft (0.6 m), for use with all X-Series products 0.04 kg
X-DC02-NP 1 Data cable, no power, 2 ft (0.6 m), for use with all X-Series products 0.040 kg
X-USBDC 1 USB to serial converter cable with M8 female plug for X-Series products 0.06 kg

X-LRT0750AL-E08C-PTB2

  • Accuracy (unidirectional): 188 µm
  • Backlash: < 6 µm
  • Linear Motion Per Motor Rev: 1.5875
  • Maximum Speed: 45 mm/s
  • Mechanical Drive System: Precision lead screw
  • Microstep Size (Default Resolution): 0.124023438
  • Minimum Speed: 0.0000757 mm/s
  • Peak Thrust: 1200 N
  • Repeatability: < 2 µm
  • Travel Range: 750 mm
  • Weight: 7.076 kg
  • X – Travel Range: 750 mm travel
  • Accuracy: +/- 188
  • Maximum Continuous Thrust: 1200 N
  • Back-driving Force: Non-back-driving,Non-back-driving

X-LRT0750AL-E08C-PTB2 is a kit, comprised of:

Product Code Qty Description Weight
X-LRT0750AL-E08C 1 Motorized, lead-screw driven, covered linear stage, 750 mm travel, integrated motor encoder and controller, fine resolution, low speed 7.076 kg
PTB2 1 Power terminal block, 2 pin, 5 mm pitch, for use with X-Series devices with custom power supply 0.004 kg

X-LRT0750BL-E08C-KX14N

  • Accuracy (unidirectional): 188 µm
  • Backlash: < 10 µm
  • Linear Motion Per Motor Rev: 6.35
  • Maximum Speed: 175 mm/s
  • Mechanical Drive System: Precision lead screw
  • Microstep Size (Default Resolution): 0.49609375
  • Minimum Speed: 0.000303 mm/s
  • Peak Thrust: 600 N
  • Repeatability: < 2 µm
  • Travel Range: 750 mm
  • Weight: 7.076 kg
  • Accuracy: +/- 188
  • Maximum Continuous Thrust: 600 N
  • Back-driving Force: 420 N (± 30%)

X-LRT0750BL-E08C-KX14N is a kit, comprised of:

Product Code Qty Description Weight
X-LRT0750BL-E08C 1 Motorized, lead-screw driven, covered linear stage, 750 mm travel, integrated motor encoder and controller, medium resolution, medium speed 7.076 kg
PS14-48V37-G 1 Power Supply, 48 V 3.75 A, compatible with X-Series Products 0.75 kg
X-DC02 1 Data Cable, 2 ft (0.6 m), for use with all X-Series products 0.04 kg
X-DC02-NP 1 Data cable, no power, 2 ft (0.6 m), for use with all X-Series products 0.040 kg
X-USBDC 1 USB to serial converter cable with M8 female plug for X-Series products 0.06 kg

X-LRT0750BL-E08C-PTB2

  • Accuracy (unidirectional): 188 µm
  • Backlash: < 10 µm
  • Linear Motion Per Motor Rev: 6.35
  • Maximum Speed: 175 mm/s
  • Mechanical Drive System: Precision lead screw
  • Microstep Size (Default Resolution): 0.49609375
  • Minimum Speed: 0.000303 mm/s
  • Peak Thrust: 600 N
  • Repeatability: < 2 µm
  • Travel Range: 750 mm
  • Weight: 7.076 kg
  • Accuracy: +/- 188
  • Maximum Continuous Thrust: 600 N
  • Back-driving Force: 420 N (± 30%)

X-LRT0750BL-E08C-PTB2 is a kit, comprised of:

Product Code Qty Description Weight
X-LRT0750BL-E08C 1 Motorized, lead-screw driven, covered linear stage, 750 mm travel, integrated motor encoder and controller, medium resolution, medium speed 7.076 kg
PTB2 1 Power terminal block, 2 pin, 5 mm pitch, for use with X-Series devices with custom power supply 0.004 kg

X-LRT0750DL-E08C-KX14N

  • Accuracy (unidirectional): 188 µm
  • Backlash: < 32 µm
  • Linear Motion Per Motor Rev: 25.4
  • Maximum Speed: 700 mm/s
  • Mechanical Drive System: Precision lead screw
  • Microstep Size (Default Resolution): 1.984375
  • Minimum Speed: 0.00121 mm/s
  • Peak Thrust: 200 N
  • Repeatability: < 4 µm
  • Travel Range: 750 mm
  • Weight: 7.076 kg
  • Accuracy: +/- 188
  • Maximum Continuous Thrust: 200 N
  • Back-driving Force: 40 N (± 30%)

X-LRT0750DL-E08C-KX14N is a kit, comprised of:

Product Code Qty Description Weight
X-LRT0750DL-E08C 1 Motorized, lead-screw driven, covered linear stage, 750 mm travel, integrated motor encoder and controller, coarse resolution, high speed 7.076 kg
PS14-48V37-G 1 Power Supply, 48 V 3.75 A, compatible with X-Series Products 0.75 kg
X-DC02 1 Data Cable, 2 ft (0.6 m), for use with all X-Series products 0.04 kg
X-DC02-NP 1 Data cable, no power, 2 ft (0.6 m), for use with all X-Series products 0.040 kg
X-USBDC 1 USB to serial converter cable with M8 female plug for X-Series products 0.06 kg

X-LRT0750DL-E08C-PTB2

  • Accuracy (unidirectional): 188 µm
  • Backlash: < 32 µm
  • Linear Motion Per Motor Rev: 25.4
  • Maximum Speed: 700 mm/s
  • Mechanical Drive System: Precision lead screw
  • Microstep Size (Default Resolution): 1.984375
  • Minimum Speed: 0.00121 mm/s
  • Peak Thrust: 200 N
  • Repeatability: < 4 µm
  • Travel Range: 750 mm
  • Weight: 7.076 kg
  • Accuracy: +/- 188
  • Maximum Continuous Thrust: 200 N
  • Back-driving Force: 40 N (± 30%)

X-LRT0750DL-E08C-PTB2 is a kit, comprised of:

Product Code Qty Description Weight
X-LRT0750DL-E08C 1 Motorized, lead-screw driven, covered linear stage, 750 mm travel, integrated motor encoder and controller, coarse resolution, high speed 7.076 kg
PTB2 1 Power terminal block, 2 pin, 5 mm pitch, for use with X-Series devices with custom power supply 0.004 kg

X-LRT0750HL-E08C-KX14N

  • Accuracy (unidirectional): 338 µm
  • Backlash: < 20 µm
  • Linear Motion Per Motor Rev: 5
  • Maximum Speed: 140 mm/s
  • Mechanical Drive System: Precision ball screw
  • Microstep Size (Default Resolution): 0.390625
  • Minimum Speed: 0.000238583 mm/s
  • Peak Thrust: 1200 N
  • Repeatability: < 4 µm
  • Travel Range: 750 mm
  • Weight: 7.076 kg
  • Accuracy: +/- 188
  • Maximum Continuous Thrust: 1200 N
  • Back-driving Force: 157 N (± 30%)

X-LRT0750HL-E08C-KX14N is a kit, comprised of:

Product Code Qty Description Weight
X-LRT0750HL-E08C 1 Motorized, ball-screw driven, covered linear stage, 750 mm travel, integrated motor encoder and controller, medium resolution, medium speed 7.076 kg
PS14-48V37-G 1 Power Supply, 48 V 3.75 A, compatible with X-Series Products 0.75 kg
X-DC02 1 Data Cable, 2 ft (0.6 m), for use with all X-Series products 0.04 kg
X-DC02-NP 1 Data cable, no power, 2 ft (0.6 m), for use with all X-Series products 0.040 kg
X-USBDC 1 USB to serial converter cable with M8 female plug for X-Series products 0.06 kg

X-LRT0750HL-E08C-PTB2

  • Accuracy (unidirectional): 338 µm
  • Backlash: < 20 µm
  • Linear Motion Per Motor Rev: 5
  • Maximum Speed: 140 mm/s
  • Mechanical Drive System: Precision ball screw
  • Microstep Size (Default Resolution): 0.390625
  • Minimum Speed: 0.000238583 mm/s
  • Peak Thrust: 1200 N
  • Repeatability: < 4 µm
  • Travel Range: 750 mm
  • Weight: 7.076 kg
  • Accuracy: +/- 188
  • Maximum Continuous Thrust: 1200 N
  • Back-driving Force: 157 N (± 30%)

X-LRT0750HL-E08C-PTB2 is a kit, comprised of:

Product Code Qty Description Weight
X-LRT0750HL-E08C 1 Motorized, ball-screw driven, covered linear stage, 750 mm travel, integrated motor encoder and controller, medium resolution, medium speed 7.076 kg
PTB2 1 Power terminal block, 2 pin, 5 mm pitch, for use with X-Series devices with custom power supply 0.004 kg

X-LRT1000AL-E08C-KX14N

  • Accuracy (unidirectional): 250 µm
  • Backlash: < 6 µm
  • Linear Motion Per Motor Rev: 1.5875
  • Maximum Speed: 45 mm/s
  • Mechanical Drive System: Precision lead screw
  • Microstep Size (Default Resolution): 0.124023438
  • Minimum Speed: 0.0000757 mm/s
  • Peak Thrust: 1200 N
  • Repeatability: < 2 µm
  • Travel Range: 1000 mm
  • Weight: 8.393 kg
  • Accuracy: +/- 250
  • Maximum Continuous Thrust: 1200 N
  • Back-driving Force: Non-back-driving,Non-back-driving

X-LRT1000AL-E08C-KX14N is a kit, comprised of:

Product Code Qty Description Weight
X-LRT1000AL-E08C 1 Motorized, lead-screw driven, covered linear stage, 1000 mm travel, integrated motor encoder and controller, fine resolution, low speed 8.393 kg
PS14-48V37-G 1 Power Supply, 48 V 3.75 A, compatible with X-Series Products 0.75 kg
X-DC02 1 Data Cable, 2 ft (0.6 m), for use with all X-Series products 0.04 kg
X-DC02-NP 1 Data cable, no power, 2 ft (0.6 m), for use with all X-Series products 0.040 kg
X-USBDC 1 USB to serial converter cable with M8 female plug for X-Series products 0.06 kg

X-LRT1000AL-E08C-PTB2

  • Accuracy (unidirectional): 250 µm
  • Backlash: < 6 µm
  • Linear Motion Per Motor Rev: 1.5875
  • Maximum Speed: 45 mm/s
  • Mechanical Drive System: Precision lead screw
  • Microstep Size (Default Resolution): 0.124023438
  • Minimum Speed: 0.0000757 mm/s
  • Peak Thrust: 1200 N
  • Repeatability: < 2 µm
  • Travel Range: 1000 mm
  • Weight: 8.393 kg
  • X – Travel Range: 1000 mm travel
  • Accuracy: +/- 250
  • Maximum Continuous Thrust: 1200 N
  • Back-driving Force: Non-back-driving,Non-back-driving

X-LRT1000AL-E08C-PTB2 is a kit, comprised of:

Product Code Qty Description Weight
X-LRT1000AL-E08C 1 Motorized, lead-screw driven, covered linear stage, 1000 mm travel, integrated motor encoder and controller, fine resolution, low speed 8.393 kg
PTB2 1 Power terminal block, 2 pin, 5 mm pitch, for use with X-Series devices with custom power supply 0.004 kg

X-LRT1000BL-E08C-KX14N

  • Accuracy (unidirectional): 250 µm
  • Backlash: < 10 µm
  • Linear Motion Per Motor Rev: 6.35
  • Maximum Speed: 175 mm/s
  • Mechanical Drive System: Precision lead screw
  • Microstep Size (Default Resolution): 0.49609375
  • Minimum Speed: 0.000303 mm/s
  • Peak Thrust: 600 N
  • Repeatability: < 2 µm
  • Travel Range: 1000 mm
  • Weight: 8.393 kg
  • Accuracy: +/- 250
  • Maximum Continuous Thrust: 600 N
  • Back-driving Force: 420 N (± 30%)

X-LRT1000BL-E08C-KX14N is a kit, comprised of:

Product Code Qty Description Weight
X-LRT1000BL-E08C 1 Motorized, lead-screw driven, covered linear stage, 1000 mm travel, integrated motor encoder and controller, medium resolution, medium speed 8.393 kg
PS14-48V37-G 1 Power Supply, 48 V 3.75 A, compatible with X-Series Products 0.75 kg
X-DC02 1 Data Cable, 2 ft (0.6 m), for use with all X-Series products 0.04 kg
X-DC02-NP 1 Data cable, no power, 2 ft (0.6 m), for use with all X-Series products 0.040 kg
X-USBDC 1 USB to serial converter cable with M8 female plug for X-Series products 0.06 kg

X-LRT1000BL-E08C-PTB2

  • Accuracy (unidirectional): 250 µm
  • Backlash: < 10 µm
  • Linear Motion Per Motor Rev: 6.35
  • Maximum Speed: 175 mm/s
  • Mechanical Drive System: Precision lead screw
  • Microstep Size (Default Resolution): 0.49609375
  • Minimum Speed: 0.000303 mm/s
  • Peak Thrust: 600 N
  • Repeatability: < 2 µm
  • Travel Range: 1000 mm
  • Weight: 8.393 kg
  • Accuracy: +/- 250
  • Maximum Continuous Thrust: 600 N
  • Back-driving Force: 420 N (± 30%)

X-LRT1000BL-E08C-PTB2 is a kit, comprised of:

Product Code Qty Description Weight
X-LRT1000BL-E08C 1 Motorized, lead-screw driven, covered linear stage, 1000 mm travel, integrated motor encoder and controller, medium resolution, medium speed 8.393 kg
PTB2 1 Power terminal block, 2 pin, 5 mm pitch, for use with X-Series devices with custom power supply 0.004 kg

X-LRT1000DL-E08C-KX14N

  • Accuracy (unidirectional): 250 µm
  • Backlash: < 32 µm
  • Linear Motion Per Motor Rev: 25.4
  • Maximum Speed: 700 mm/s
  • Mechanical Drive System: Precision lead screw
  • Microstep Size (Default Resolution): 1.984375
  • Minimum Speed: 0.00121 mm/s
  • Peak Thrust: 200 N
  • Repeatability: < 4 µm
  • Travel Range: 1000 mm
  • Weight: 8.393 kg
  • Accuracy: +/- 250
  • Maximum Continuous Thrust: 200 N
  • Back-driving Force: 40 N (± 30%)

X-LRT1000DL-E08C-KX14N is a kit, comprised of:

Product Code Qty Description Weight
X-LRT1000DL-E08C 1 Motorized, lead-screw driven, covered linear stage, 1000 mm travel, integrated motor encoder and controller, coarse resolution, high speed 8.393 kg
PS14-48V37-G 1 Power Supply, 48 V 3.75 A, compatible with X-Series Products 0.75 kg
X-DC02 1 Data Cable, 2 ft (0.6 m), for use with all X-Series products 0.04 kg
X-DC02-NP 1 Data cable, no power, 2 ft (0.6 m), for use with all X-Series products 0.040 kg
X-USBDC 1 USB to serial converter cable with M8 female plug for X-Series products 0.06 kg

X-LRT1000DL-E08C-PTB2

  • Accuracy (unidirectional): 250 µm
  • Backlash: < 32 µm
  • Linear Motion Per Motor Rev: 25.4
  • Maximum Speed: 700 mm/s
  • Mechanical Drive System: Precision lead screw
  • Microstep Size (Default Resolution): 1.984375
  • Minimum Speed: 0.00121 mm/s
  • Peak Thrust: 200 N
  • Repeatability: < 4 µm
  • Travel Range: 1000 mm
  • Weight: 8.393 kg
  • Accuracy: +/- 250
  • Maximum Continuous Thrust: 200 N
  • Back-driving Force: 40 N (± 30%)

X-LRT1000DL-E08C-PTB2 is a kit, comprised of:

Product Code Qty Description Weight
X-LRT1000DL-E08C 1 Motorized, lead-screw driven, covered linear stage, 1000 mm travel, integrated motor encoder and controller, coarse resolution, high speed 8.393 kg
PTB2 1 Power terminal block, 2 pin, 5 mm pitch, for use with X-Series devices with custom power supply 0.004 kg

X-LRT1000HL-E08C-KX14N

  • Accuracy (unidirectional): 450 µm
  • Backlash: < 20 µm
  • Linear Motion Per Motor Rev: 5
  • Maximum Speed: 140 mm/s
  • Mechanical Drive System: Precision ball screw
  • Microstep Size (Default Resolution): 0.390625
  • Minimum Speed: 0.000238583 mm/s
  • Peak Thrust: 1200 N
  • Repeatability: < 4 µm
  • Travel Range: 1000 mm
  • Weight: 8.393 kg
  • Accuracy: +/- 250
  • Maximum Continuous Thrust: 1200 N
  • Back-driving Force: 157 N (± 30%)

X-LRT1000HL-E08C-KX14N is a kit, comprised of:

Product Code Qty Description Weight
X-LRT1000HL-E08C 1 Motorized, ball-screw driven, covered linear stage, 1000 mm travel, integrated motor encoder and controller, medium resolution, medium speed 8.393 kg
PS14-48V37-G 1 Power Supply, 48 V 3.75 A, compatible with X-Series Products 0.75 kg
X-DC02 1 Data Cable, 2 ft (0.6 m), for use with all X-Series products 0.04 kg
X-DC02-NP 1 Data cable, no power, 2 ft (0.6 m), for use with all X-Series products 0.040 kg
X-USBDC 1 USB to serial converter cable with M8 female plug for X-Series products 0.06 kg

X-LRT1000HL-E08C-PTB2

  • Accuracy (unidirectional): 450 µm
  • Backlash: < 20 µm
  • Linear Motion Per Motor Rev: 5
  • Maximum Speed: 140 mm/s
  • Mechanical Drive System: Precision ball screw
  • Microstep Size (Default Resolution): 0.390625
  • Minimum Speed: 0.000238583 mm/s
  • Peak Thrust: 1200 N
  • Repeatability: < 4 µm
  • Travel Range: 1000 mm
  • Weight: 8.393 kg
  • Accuracy: +/- 250
  • Maximum Continuous Thrust: 1200 N
  • Back-driving Force: 157 N (± 30%)

X-LRT1000HL-E08C-PTB2 is a kit, comprised of:

Product Code Qty Description Weight
X-LRT1000HL-E08C 1 Motorized, ball-screw driven, covered linear stage, 1000 mm travel, integrated motor encoder and controller, medium resolution, medium speed 8.393 kg
PTB2 1 Power terminal block, 2 pin, 5 mm pitch, for use with X-Series devices with custom power supply 0.004 kg

X-LRT1500AL-E08C-KX14N

  • Accuracy (unidirectional): 375 µm
  • Backlash: < 6 µm
  • Linear Motion Per Motor Rev: 1.5875
  • Maximum Speed: 15 mm/s
  • Mechanical Drive System: Precision lead screw
  • Microstep Size (Default Resolution): 0.124023438
  • Minimum Speed: 0.0000757 mm/s
  • Peak Thrust: 1200 N
  • Repeatability: < 2 µm
  • Travel Range: 1500 mm
  • Weight: 11.028 kg
  • Accuracy: +/- 375
  • Maximum Continuous Thrust: 1200 N
  • Back-driving Force: Non-back-driving,Non-back-driving

X-LRT1500AL-E08C-KX14N is a kit, comprised of:

Product Code Qty Description Weight
X-LRT1500AL-E08C 1 Motorized, lead-screw driven, covered linear stage, 1500 mm travel, integrated motor encoder and controller, fine resolution, low speed 11.028 kg
PS14-48V37-G 1 Power Supply, 48 V 3.75 A, compatible with X-Series Products 0.75 kg
X-DC02 1 Data Cable, 2 ft (0.6 m), for use with all X-Series products 0.04 kg
X-DC02-NP 1 Data cable, no power, 2 ft (0.6 m), for use with all X-Series products 0.040 kg
X-USBDC 1 USB to serial converter cable with M8 female plug for X-Series products 0.06 kg

X-LRT1500AL-E08C-PTB2

  • Accuracy (unidirectional): 375 µm
  • Backlash: < 6 µm
  • Linear Motion Per Motor Rev: 1.5875
  • Maximum Speed: 15 mm/s
  • Mechanical Drive System: Precision lead screw
  • Microstep Size (Default Resolution): 0.124023438
  • Minimum Speed: 0.0000757 mm/s
  • Peak Thrust: 1200 N
  • Repeatability: < 2 µm
  • Travel Range: 1500 mm
  • Weight: 11.028 kg
  • X – Travel Range: 1500 mm travel
  • Accuracy: +/- 375
  • Maximum Continuous Thrust: 1200 N
  • Back-driving Force: Non-back-driving,Non-back-driving

X-LRT1500AL-E08C-PTB2 is a kit, comprised of:

Product Code Qty Description Weight
X-LRT1500AL-E08C 1 Motorized, lead-screw driven, covered linear stage, 1500 mm travel, integrated motor encoder and controller, fine resolution, low speed 11.028 kg
PTB2 1 Power terminal block, 2 pin, 5 mm pitch, for use with X-Series devices with custom power supply 0.004 kg

X-LRT1500BL-E08C-KX14N

  • Accuracy (unidirectional): 375 µm
  • Backlash: < 10 µm
  • Linear Motion Per Motor Rev: 6.35
  • Maximum Speed: 60 mm/s
  • Mechanical Drive System: Precision lead screw
  • Microstep Size (Default Resolution): 0.49609375
  • Minimum Speed: 0.000303 mm/s
  • Peak Thrust: 600 N
  • Repeatability: < 2 µm
  • Travel Range: 1500 mm
  • Weight: 11.028 kg
  • Accuracy: +/- 375
  • Maximum Continuous Thrust: 600 N
  • Back-driving Force: 420 N (± 30%)

X-LRT1500BL-E08C-KX14N is a kit, comprised of:

Product Code Qty Description Weight
X-LRT1500BL-E08C 1 Motorized, lead-screw driven, covered linear stage, 1500 mm travel, integrated motor encoder and controller, medium resolution, medium speed 11.028 kg
PS14-48V37-G 1 Power Supply, 48 V 3.75 A, compatible with X-Series Products 0.75 kg
X-DC02 1 Data Cable, 2 ft (0.6 m), for use with all X-Series products 0.04 kg
X-DC02-NP 1 Data cable, no power, 2 ft (0.6 m), for use with all X-Series products 0.040 kg
X-USBDC 1 USB to serial converter cable with M8 female plug for X-Series products 0.06 kg

X-LRT1500BL-E08C-PTB2

  • Accuracy (unidirectional): 375 µm
  • Backlash: < 10 µm
  • Linear Motion Per Motor Rev: 6.35
  • Maximum Speed: 60 mm/s
  • Mechanical Drive System: Precision lead screw
  • Microstep Size (Default Resolution): 0.49609375
  • Minimum Speed: 0.000303 mm/s
  • Peak Thrust: 600 N
  • Repeatability: < 2 µm
  • Travel Range: 1500 mm
  • Weight: 11.028 kg
  • Accuracy: +/- 375
  • Maximum Continuous Thrust: 600 N
  • Back-driving Force: 420 N (± 30%)

X-LRT1500BL-E08C-PTB2 is a kit, comprised of:

Product Code Qty Description Weight
X-LRT1500BL-E08C 1 Motorized, lead-screw driven, covered linear stage, 1500 mm travel, integrated motor encoder and controller, medium resolution, medium speed 11.028 kg
PTB2 1 Power terminal block, 2 pin, 5 mm pitch, for use with X-Series devices with custom power supply 0.004 kg

X-LRT1500DL-E08C-KX14N

  • Accuracy (unidirectional): 375 µm
  • Backlash: < 32 µm
  • Linear Motion Per Motor Rev: 25.4
  • Maximum Speed: 240 mm/s
  • Mechanical Drive System: Precision lead screw
  • Microstep Size (Default Resolution): 1.984375
  • Minimum Speed: 0.00121 mm/s
  • Peak Thrust: 200 N
  • Repeatability: < 4 µm
  • Travel Range: 1500 mm
  • Weight: 11.028 kg
  • Accuracy: +/- 375
  • Maximum Continuous Thrust: 200 N
  • Back-driving Force: 40 N (± 30%)

X-LRT1500DL-E08C-KX14N is a kit, comprised of:

Product Code Qty Description Weight
X-LRT1500DL-E08C 1 Motorized, lead-screw driven, covered linear stage, 1500 mm travel, integrated motor encoder and controller, coarse resolution, high speed 11.028 kg
PS14-48V37-G 1 Power Supply, 48 V 3.75 A, compatible with X-Series Products 0.75 kg
X-DC02 1 Data Cable, 2 ft (0.6 m), for use with all X-Series products 0.04 kg
X-DC02-NP 1 Data cable, no power, 2 ft (0.6 m), for use with all X-Series products 0.040 kg
X-USBDC 1 USB to serial converter cable with M8 female plug for X-Series products 0.06 kg

X-LRT1500DL-E08C-PTB2

  • Accuracy (unidirectional): 375 µm
  • Backlash: < 32 µm
  • Linear Motion Per Motor Rev: 25.4
  • Maximum Speed: 240 mm/s
  • Mechanical Drive System: Precision lead screw
  • Microstep Size (Default Resolution): 1.984375
  • Minimum Speed: 0.00121 mm/s
  • Peak Thrust: 200 N
  • Repeatability: < 4 µm
  • Travel Range: 1500 mm
  • Weight: 11.028 kg
  • Accuracy: +/- 375
  • Maximum Continuous Thrust: 200 N
  • Back-driving Force: 40 N (± 30%)

X-LRT1500DL-E08C-PTB2 is a kit, comprised of:

Product Code Qty Description Weight
X-LRT1500DL-E08C 1 Motorized, lead-screw driven, covered linear stage, 1500 mm travel, integrated motor encoder and controller, coarse resolution, high speed 11.028 kg
PTB2 1 Power terminal block, 2 pin, 5 mm pitch, for use with X-Series devices with custom power supply 0.004 kg
Zaber-CE-Declaration-of-Conformity-Machinery
Zaber-CE-Declaration-of-Conformity-EMC
Getting-started-guide
X-LRT0100xL-E08C_IGES
X-LRT0100xL-E08C.step
X-LRT0100xL-E08C
BACK
TO TOP

Request a Demo

X-LRT-EC Series

Ask the Expert

If you’re interested in the products shown here, or have questions about something you can’t find on our website, please get in touch through the form below.

Our knowledgeable sales team will be happy to help. We can normally source exactly what you need, or work with you to come up with custom solutions.

Alternatively, just call +44 (0) 1933 461 666 and ask to speak to the Photonics team.