Laser 2000
Home > Products > Manual & Motorised Motion > Motorised Linear & Vertical Stages > Linear Stages with Built-in Controllers > High vacuum miniature motorized linear stages with built-in controllers

High vacuum miniature motorized linear stages with built-in controllers

Select from the options below to find the model that’s right for you.

Please see the Series Specs tab for common specs for the X-LSM-SV2 series, and refer to the Options tab for further details of each model.

Zaber Technologies Logo

  • Vacuum compatible to 10-6 Torr
  • 25, 50, 100, 150, 200 mm travel
  • 10 kg load capacity
  • Up to 100 mm/s speed and up to 35 N thrust
  • Built-in controller; daisy-chains with other Zaber Technologies products
  • Only 4 feedthrough wires required to control all units in the daisy-chain via serial port (with an X-PIB adaptor)
  • Custom versions available

Features:

1. Integrated stepper motor controller and motor driver allows for easy-to-use control.
2. 200 step per revolution stepper motor, microstepped up to 256x to provide smooth and precise motion.
3. High vacuum compatible stepper motors rated to 10-6 torr.
4. Stage top supports metric M3 and M6 threaded holes with M4 centre mount and can be removed for lower XY profile.
5. Only 4 feedthrough wires required to control all units in the daisy-chain via serial port (with an X-PIB adaptor).
6. Daisy-chain additional units to reduce wiring clutter. Power and data can be shared in the chain.
7. Travel lengths from 25 to 200 mm, with custom lengths available.
8. Innovative design allows for superior speed & load capabilities; up to 100 mm/s speed & 10 kg load.
9. Multiple X-LSM-SV2 stages can be assembled in XY or XYZ without additional hardware.

Zaber Technologies’ X-LSM-SV2 Series devices are high-vacuum compatible, computer-controlled, motorized linear stages with high thrust and speed capabilities, and a compact size. They are stand-alone units requiring only a standard 24 V or 48 V power supply.

 

Zaber Technologies ASCII Protocol Manual (Wiki)
Zaber Technologies Binary Protocol Manual (Wiki)

Axes of Motion

1

Built-in Controller

Yes

CE Compliant

Yes

Communication Protocol

Zaber Technologies ASCII (Default), Zaber Technologies Binary

Data Cable Connection

Teflon flying leads with M8 4 pin M/F

Default Resolution

1/64 of a step

Encoder Type

None

Guide Type

Needle roller bearing

Inductance

3.5 mH/phase

Limit or Home Sensing

Magnetic hall sensor

Maximum Cantilever Load

300 N·cm

Maximum Centered Load

100 N

Maximum Continuous Thrust

25 N

Maximum Current Draw

350 mA

Mechanical Drive System

Precision lead screw

Motor Rated Current

800 mA/phase

Motor Steps Per Rev

200

Motor type

Stepper (2 phase)

Mounting Interface

M3 and M6 threaded holes and M4 threaded center hole

Operating Temperature

0 – 50 °C

Power Plug

None, use X-PIB

Power Supply

24-48 VDC

RoHS Compliant

Yes

Stage Parallelism

< 25 µm

Stiffness in Pitch

55 N·m/deg

Stiffness in Roll

52.5 N·m/deg

Stiffness in Yaw

85 N·m/deg

Vacuum Compatible

High vacuum (10-6 Torr)

Travel Range

25 mm travel, 50 mm travel, 100 mm travel, 150 mm travel, 200 mm travel

LED Indicators

Yes

X-LSM025A-SV2-KX13P

  • Accuracy (unidirectional): 15 µm
  • Backlash: < 12 µm
  • Horizontal Runout: < 12 µm
  • Linear Motion Per Motor Rev: 0.6096
  • Maximum Speed: 24 mm/s
  • Microstep Size (Default Resolution): 0.047625
  • Minimum Speed: 0.000029 mm/s
  • Peak Thrust: 35 N
  • Pitch: 0.02 °
  • Repeatability: < 3 µm
  • Roll: 0.02 °
  • Speed Resolution: 0.000029 mm/s
  • Travel Range: 25.4 mm
  • Vertical Runout: < 8 µm
  • Weight: 0.39 kg
  • Yaw: 0.03 °
  • Kit: Power supply, 48 V 1.25 A

X-LSM025A-SV2-KX13P is a kit, comprised of:

Product CodeQtyDescriptionWeight
X-LSM025A-SV21High vacuum, motorized Linear Stage, 25 mm travel, integrated controller, fine resolution, low speed0.39 kg
PS13-48V12-G1Power Supply, 48 V 1.25 A, compatible with X-Series Products0.44 kg
X-DC061Data Cable, 6 ft (2 m), for use with all X-Series products0.08 kg
X-PIB1Device for adding 24 - 48 V power into an X-series daisy chain0.065 kg
X-SDC1Serial adaptor cable with M8 female plug for X-Series products0.09 kg
X-USBDC1USB to serial converter cable with M8 female plug for X-Series products0.06 kg

X-LSM025A-SV2-KX14P

  • Accuracy (unidirectional): 15 µm
  • Backlash: < 12 µm
  • Horizontal Runout: < 12 µm
  • Linear Motion Per Motor Rev: 0.6096
  • Maximum Speed: 24 mm/s
  • Microstep Size (Default Resolution): 0.047625
  • Minimum Speed: 0.000029 mm/s
  • Peak Thrust: 35 N
  • Pitch: 0.02 °
  • Repeatability: < 3 µm
  • Roll: 0.02 °
  • Speed Resolution: 0.000029 mm/s
  • Travel Range: 25.4 mm
  • Vertical Runout: < 8 µm
  • Weight: 0.39 kg
  • Yaw: 0.03 °
  • Kit: Power supply, 48 V 3.75 A

X-LSM025A-SV2-KX14P is a kit, comprised of:

Product CodeQtyDescriptionWeight
X-LSM025A-SV21High vacuum, motorized Linear Stage, 25 mm travel, integrated controller, fine resolution, low speed0.39 kg
PS14-48V37-G1Power Supply, 48 V 3.75 A, compatible with X-Series Products0.75 kg
X-DC061Data Cable, 6 ft (2 m), for use with all X-Series products0.08 kg
X-PIB1Device for adding 24 - 48 V power into an X-series daisy chain0.065 kg
X-SDC1Serial adaptor cable with M8 female plug for X-Series products0.09 kg
X-USBDC1USB to serial converter cable with M8 female plug for X-Series products0.06 kg

X-LSM025B-SV2-KX13P

  • Accuracy (unidirectional): 15 µm
  • Backlash: < 16 µm
  • Horizontal Runout: < 12 µm
  • Linear Motion Per Motor Rev: 2.4384
  • Maximum Speed: 100 mm/s
  • Microstep Size (Default Resolution): 0.1905
  • Minimum Speed: 0.000116 mm/s
  • Peak Thrust: 15 N
  • Pitch: 0.02 °
  • Repeatability: < 6 µm
  • Roll: 0.02 °
  • Speed Resolution: 0.000116 mm/s
  • Travel Range: 25.4 mm
  • Vertical Runout: < 8 µm
  • Weight: 0.39 kg
  • Yaw: 0.03 °

X-LSM025B-SV2-KX13P is a kit, comprised of:

Product CodeQtyDescriptionWeight
X-LSM025B-SV21High vacuum, motorized Linear Stage, 25 mm travel, integrated controller, medium resolution, medium speed0.39 kg
PS13-48V12-G1Power Supply, 48 V 1.25 A, compatible with X-Series Products0.44 kg
X-DC061Data Cable, 6 ft (2 m), for use with all X-Series products0.08 kg
X-PIB1Device for adding 24 - 48 V power into an X-series daisy chain0.065 kg
X-SDC1Serial adaptor cable with M8 female plug for X-Series products0.09 kg
X-USBDC1USB to serial converter cable with M8 female plug for X-Series products0.06 kg

X-LSM025B-SV2-KX14P

  • Accuracy (unidirectional): 15 µm
  • Backlash: < 16 µm
  • Horizontal Runout: < 12 µm
  • Linear Motion Per Motor Rev: 2.4384
  • Maximum Speed: 100 mm/s
  • Microstep Size (Default Resolution): 0.1905
  • Minimum Speed: 0.000116 mm/s
  • Peak Thrust: 15 N
  • Pitch: 0.02 °
  • Repeatability: < 6 µm
  • Roll: 0.02 °
  • Speed Resolution: 0.000116 mm/s
  • Travel Range: 25.4 mm
  • Vertical Runout: < 8 µm
  • Weight: 0.39 kg
  • Yaw: 0.03 °

X-LSM025B-SV2-KX14P is a kit, comprised of:

Product CodeQtyDescriptionWeight
X-LSM025B-SV21High vacuum, motorized Linear Stage, 25 mm travel, integrated controller, medium resolution, medium speed0.39 kg
PS14-48V37-G1Power Supply, 48 V 3.75 A, compatible with X-Series Products0.75 kg
X-DC061Data Cable, 6 ft (2 m), for use with all X-Series products0.08 kg
X-PIB1Device for adding 24 - 48 V power into an X-series daisy chain0.065 kg
X-SDC1Serial adaptor cable with M8 female plug for X-Series products0.09 kg
X-USBDC1USB to serial converter cable with M8 female plug for X-Series products0.06 kg

X-LSM050A-SV2-KX13P

  • Accuracy (unidirectional): 20 µm
  • Backlash: < 12 µm
  • Horizontal Runout: < 14 µm
  • Linear Motion Per Motor Rev: 0.6096
  • Maximum Speed: 24 mm/s
  • Microstep Size (Default Resolution): 0.047625
  • Minimum Speed: 0.000029 mm/s
  • Peak Thrust: 35 N
  • Pitch: 0.03 °
  • Repeatability: < 3 µm
  • Roll: 0.03 °
  • Speed Resolution: 0.000029 mm/s
  • Travel Range: 50.8 mm
  • Vertical Runout: < 11 µm
  • Weight: 0.40 kg
  • Yaw: 0.03 °

X-LSM050A-SV2-KX13P is a kit, comprised of:

Product CodeQtyDescriptionWeight
X-LSM050A-SV21High vacuum, motorized Linear Stage, 50 mm travel, integrated controller, fine resolution, low speed0.40 kg
PS13-48V12-G1Power Supply, 48 V 1.25 A, compatible with X-Series Products0.44 kg
X-DC061Data Cable, 6 ft (2 m), for use with all X-Series products0.08 kg
X-PIB1Device for adding 24 - 48 V power into an X-series daisy chain0.065 kg
X-SDC1Serial adaptor cable with M8 female plug for X-Series products0.09 kg
X-USBDC1USB to serial converter cable with M8 female plug for X-Series products0.06 kg

X-LSM050A-SV2-KX14P

  • Accuracy (unidirectional): 20 µm
  • Backlash: < 12 µm
  • Horizontal Runout: < 14 µm
  • Linear Motion Per Motor Rev: 0.6096
  • Maximum Speed: 24 mm/s
  • Microstep Size (Default Resolution): 0.047625
  • Minimum Speed: 0.000029 mm/s
  • Peak Thrust: 35 N
  • Pitch: 0.03 °
  • Repeatability: < 3 µm
  • Roll: 0.03 °
  • Speed Resolution: 0.000029 mm/s
  • Travel Range: 50.8 mm
  • Vertical Runout: < 11 µm
  • Weight: 0.40 kg
  • Yaw: 0.03 °

X-LSM050A-SV2-KX14P is a kit, comprised of:

Product CodeQtyDescriptionWeight
X-LSM050A-SV21High vacuum, motorized Linear Stage, 50 mm travel, integrated controller, fine resolution, low speed0.40 kg
PS14-48V37-G1Power Supply, 48 V 3.75 A, compatible with X-Series Products0.75 kg
X-DC061Data Cable, 6 ft (2 m), for use with all X-Series products0.08 kg
X-PIB1Device for adding 24 - 48 V power into an X-series daisy chain0.065 kg
X-SDC1Serial adaptor cable with M8 female plug for X-Series products0.09 kg
X-USBDC1USB to serial converter cable with M8 female plug for X-Series products0.06 kg

X-LSM050B-SV2-KX13P

  • Accuracy (unidirectional): 25 µm
  • Backlash: < 16 µm
  • Horizontal Runout: < 14 µm
  • Linear Motion Per Motor Rev: 2.4384
  • Maximum Speed: 100 mm/s
  • Microstep Size (Default Resolution): 0.1905
  • Minimum Speed: 0.000116 mm/s
  • Peak Thrust: 15 N
  • Pitch: 0.03 °
  • Repeatability: < 6 µm
  • Roll: 0.03 °
  • Speed Resolution: 0.000116 mm/s
  • Travel Range: 50.8 mm
  • Vertical Runout: < 11 µm
  • Weight: 0.40 kg
  • Yaw: 0.03 °

X-LSM050B-SV2-KX13P is a kit, comprised of:

Product CodeQtyDescriptionWeight
X-LSM050B-SV21High vacuum, motorized Linear Stage, 50 mm travel, integrated controller, medium resolution, medium speed0.40 kg
PS13-48V12-G1Power Supply, 48 V 1.25 A, compatible with X-Series Products0.44 kg
X-DC061Data Cable, 6 ft (2 m), for use with all X-Series products0.08 kg
X-PIB1Device for adding 24 - 48 V power into an X-series daisy chain0.065 kg
X-SDC1Serial adaptor cable with M8 female plug for X-Series products0.09 kg
X-USBDC1USB to serial converter cable with M8 female plug for X-Series products0.06 kg

X-LSM050B-SV2-KX14P

  • Accuracy (unidirectional): 25 µm
  • Backlash: < 16 µm
  • Horizontal Runout: < 14 µm
  • Linear Motion Per Motor Rev: 2.4384
  • Maximum Speed: 100 mm/s
  • Microstep Size (Default Resolution): 0.1905
  • Minimum Speed: 0.000116 mm/s
  • Peak Thrust: 15 N
  • Pitch: 0.03 °
  • Repeatability: < 6 µm
  • Roll: 0.03 °
  • Speed Resolution: 0.000116 mm/s
  • Travel Range: 50.8 mm
  • Vertical Runout: < 11 µm
  • Weight: 0.40 kg
  • Yaw: 0.03 °

X-LSM050B-SV2-KX14P is a kit, comprised of:

Product CodeQtyDescriptionWeight
X-LSM050B-SV21High vacuum, motorized Linear Stage, 50 mm travel, integrated controller, medium resolution, medium speed0.40 kg
PS14-48V37-G1Power Supply, 48 V 3.75 A, compatible with X-Series Products0.75 kg
X-DC061Data Cable, 6 ft (2 m), for use with all X-Series products0.08 kg
X-PIB1Device for adding 24 - 48 V power into an X-series daisy chain0.065 kg
X-SDC1Serial adaptor cable with M8 female plug for X-Series products0.09 kg
X-USBDC1USB to serial converter cable with M8 female plug for X-Series products0.06 kg

X-LSM100A-SV2-KX13P

  • Accuracy (unidirectional): 35 µm
  • Backlash: < 12 µm
  • Horizontal Runout: < 18 µm
  • Linear Motion Per Motor Rev: 0.6096
  • Maximum Speed: 24 mm/s
  • Microstep Size (Default Resolution): 0.047625
  • Minimum Speed: 0.000029 mm/s
  • Peak Thrust: 35 N
  • Pitch: 0.04 °
  • Repeatability: < 3 µm
  • Roll: 0.04 °
  • Speed Resolution: 0.000029 mm/s
  • Travel Range: 101.6 mm
  • Vertical Runout: < 18 µm
  • Weight: 0.43 kg
  • Yaw: 0.04 °

X-LSM100A-SV2-KX13P is a kit, comprised of:

Product CodeQtyDescriptionWeight
X-LSM100A-SV21High vacuum, motorized Linear Stage, 100 mm travel, integrated controller, fine resolution, low speed0.43 kg
PS13-48V12-G1Power Supply, 48 V 1.25 A, compatible with X-Series Products0.44 kg
X-DC061Data Cable, 6 ft (2 m), for use with all X-Series products0.08 kg
X-PIB1Device for adding 24 - 48 V power into an X-series daisy chain0.065 kg
X-SDC1Serial adaptor cable with M8 female plug for X-Series products0.09 kg
X-USBDC1USB to serial converter cable with M8 female plug for X-Series products0.06 kg

X-LSM100A-SV2-KX14P

  • Accuracy (unidirectional): 35 µm
  • Backlash: < 12 µm
  • Horizontal Runout: < 18 µm
  • Linear Motion Per Motor Rev: 0.6096
  • Maximum Speed: 24 mm/s
  • Microstep Size (Default Resolution): 0.047625
  • Minimum Speed: 0.000029 mm/s
  • Peak Thrust: 35 N
  • Pitch: 0.04 °
  • Repeatability: < 3 µm
  • Roll: 0.04 °
  • Speed Resolution: 0.000029 mm/s
  • Travel Range: 101.6 mm
  • Vertical Runout: < 18 µm
  • Weight: 0.43 kg
  • Yaw: 0.04 °

X-LSM100A-SV2-KX14P is a kit, comprised of:

Product CodeQtyDescriptionWeight
X-LSM100A-SV21High vacuum, motorized Linear Stage, 100 mm travel, integrated controller, fine resolution, low speed0.43 kg
PS14-48V37-G1Power Supply, 48 V 3.75 A, compatible with X-Series Products0.75 kg
X-DC061Data Cable, 6 ft (2 m), for use with all X-Series products0.08 kg
X-PIB1Device for adding 24 - 48 V power into an X-series daisy chain0.065 kg
X-SDC1Serial adaptor cable with M8 female plug for X-Series products0.09 kg
X-USBDC1USB to serial converter cable with M8 female plug for X-Series products0.06 kg

X-LSM100B-SV2-KX13P

  • Accuracy (unidirectional): 45 µm
  • Backlash: < 16 µm
  • Horizontal Runout: < 18 µm
  • Linear Motion Per Motor Rev: 2.4384
  • Maximum Speed: 100 mm/s
  • Microstep Size (Default Resolution): 0.1905
  • Minimum Speed: 0.000116 mm/s
  • Peak Thrust: 15 N
  • Pitch: 0.04 °
  • Repeatability: < 6 µm
  • Roll: 0.04 °
  • Speed Resolution: 0.000116 mm/s
  • Travel Range: 101.6 mm
  • Vertical Runout: < 18 µm
  • Weight: 0.43 kg
  • Yaw: 0.04 °

X-LSM100B-SV2-KX13P is a kit, comprised of:

Product CodeQtyDescriptionWeight
X-LSM100B-SV21High vacuum, motorized Linear Stage, 100 mm travel, integrated controller, medium resolution, medium speed0.43 kg
PS13-48V12-G1Power Supply, 48 V 1.25 A, compatible with X-Series Products0.44 kg
X-DC061Data Cable, 6 ft (2 m), for use with all X-Series products0.08 kg
X-PIB1Device for adding 24 - 48 V power into an X-series daisy chain0.065 kg
X-SDC1Serial adaptor cable with M8 female plug for X-Series products0.09 kg
X-USBDC1USB to serial converter cable with M8 female plug for X-Series products0.06 kg

X-LSM100B-SV2-KX14P

  • Accuracy (unidirectional): 45 µm
  • Backlash: < 16 µm
  • Horizontal Runout: < 18 µm
  • Linear Motion Per Motor Rev: 2.4384
  • Maximum Speed: 100 mm/s
  • Microstep Size (Default Resolution): 0.1905
  • Minimum Speed: 0.000116 mm/s
  • Peak Thrust: 15 N
  • Pitch: 0.04 °
  • Repeatability: < 6 µm
  • Roll: 0.04 °
  • Speed Resolution: 0.000116 mm/s
  • Travel Range: 101.6 mm
  • Vertical Runout: < 18 µm
  • Weight: 0.43 kg
  • Yaw: 0.04 °

X-LSM100B-SV2-KX14P is a kit, comprised of:

Product CodeQtyDescriptionWeight
X-LSM100B-SV21High vacuum, motorized Linear Stage, 100 mm travel, integrated controller, medium resolution, medium speed0.43 kg
PS14-48V37-G1Power Supply, 48 V 3.75 A, compatible with X-Series Products0.75 kg
X-DC061Data Cable, 6 ft (2 m), for use with all X-Series products0.08 kg
X-PIB1Device for adding 24 - 48 V power into an X-series daisy chain0.065 kg
X-SDC1Serial adaptor cable with M8 female plug for X-Series products0.09 kg
X-USBDC1USB to serial converter cable with M8 female plug for X-Series products0.06 kg

X-LSM150A-SV2-KX13P

  • Accuracy (unidirectional): 50 µm
  • Backlash: < 12 µm
  • Horizontal Runout: < 23 µm
  • Linear Motion Per Motor Rev: 0.6096
  • Maximum Speed: 24 mm/s
  • Microstep Size (Default Resolution): 0.047625
  • Minimum Speed: 0.000029 mm/s
  • Peak Thrust: 35 N
  • Pitch: 0.04 °
  • Repeatability: < 3 µm
  • Roll: 0.05 °
  • Speed Resolution: 0.000029 mm/s
  • Travel Range: 152.4 mm
  • Vertical Runout: < 25 µm
  • Weight: 0.47 kg
  • Yaw: 0.05 °

X-LSM150A-SV2-KX13P is a kit, comprised of:

Product CodeQtyDescriptionWeight
X-LSM150A-SV21High vacuum, motorized Linear Stage, 150 mm travel, integrated controller, fine resolution, low speed0.47 kg
PS13-48V12-G1Power Supply, 48 V 1.25 A, compatible with X-Series Products0.44 kg
X-DC061Data Cable, 6 ft (2 m), for use with all X-Series products0.08 kg
X-PIB1Device for adding 24 - 48 V power into an X-series daisy chain0.065 kg
X-SDC1Serial adaptor cable with M8 female plug for X-Series products0.09 kg
X-USBDC1USB to serial converter cable with M8 female plug for X-Series products0.06 kg

X-LSM150A-SV2-KX14P

  • Accuracy (unidirectional): 50 µm
  • Backlash: < 12 µm
  • Horizontal Runout: < 23 µm
  • Linear Motion Per Motor Rev: 0.6096
  • Maximum Speed: 24 mm/s
  • Microstep Size (Default Resolution): 0.047625
  • Minimum Speed: 0.000029 mm/s
  • Peak Thrust: 35 N
  • Pitch: 0.04 °
  • Repeatability: < 3 µm
  • Roll: 0.05 °
  • Speed Resolution: 0.000029 mm/s
  • Travel Range: 152.4 mm
  • Vertical Runout: < 25 µm
  • Weight: 0.47 kg
  • Yaw: 0.05 °

X-LSM150A-SV2-KX14P is a kit, comprised of:

Product CodeQtyDescriptionWeight
X-LSM150A-SV21High vacuum, motorized Linear Stage, 150 mm travel, integrated controller, fine resolution, low speed0.47 kg
PS14-48V37-G1Power Supply, 48 V 3.75 A, compatible with X-Series Products0.75 kg
X-DC061Data Cable, 6 ft (2 m), for use with all X-Series products0.08 kg
X-PIB1Device for adding 24 - 48 V power into an X-series daisy chain0.065 kg
X-SDC1Serial adaptor cable with M8 female plug for X-Series products0.09 kg
X-USBDC1USB to serial converter cable with M8 female plug for X-Series products0.06 kg

X-LSM150B-SV2-KX13P

  • Accuracy (unidirectional): 65 µm
  • Backlash: < 16 µm
  • Horizontal Runout: < 23 µm
  • Linear Motion Per Motor Rev: 2.4384
  • Maximum Speed: 100 mm/s
  • Microstep Size (Default Resolution): 0.1905
  • Minimum Speed: 0.000116 mm/s
  • Peak Thrust: 15 N
  • Pitch: 0.04 °
  • Repeatability: < 6 µm
  • Roll: 0.05 °
  • Speed Resolution: 0.000116 mm/s
  • Travel Range: 152.4 mm
  • Vertical Runout: < 25 µm
  • Weight: 0.47 kg
  • Yaw: 0.05 °

X-LSM150B-SV2-KX13P is a kit, comprised of:

Product CodeQtyDescriptionWeight
X-LSM150B-SV21High vacuum, motorized Linear Stage, 150 mm travel, integrated controller, medium resolution, medium speed0.47 kg
PS13-48V12-G1Power Supply, 48 V 1.25 A, compatible with X-Series Products0.44 kg
X-DC061Data Cable, 6 ft (2 m), for use with all X-Series products0.08 kg
X-PIB1Device for adding 24 - 48 V power into an X-series daisy chain0.065 kg
X-SDC1Serial adaptor cable with M8 female plug for X-Series products0.09 kg
X-USBDC1USB to serial converter cable with M8 female plug for X-Series products0.06 kg

X-LSM150B-SV2-KX14P

  • Accuracy (unidirectional): 65 µm
  • Backlash: < 16 µm
  • Horizontal Runout: < 23 µm
  • Linear Motion Per Motor Rev: 2.4384
  • Maximum Speed: 100 mm/s
  • Microstep Size (Default Resolution): 0.1905
  • Minimum Speed: 0.000116 mm/s
  • Peak Thrust: 15 N
  • Pitch: 0.04 °
  • Repeatability: < 6 µm
  • Roll: 0.05 °
  • Speed Resolution: 0.000116 mm/s
  • Travel Range: 152.4 mm
  • Vertical Runout: < 25 µm
  • Weight: 0.47 kg
  • Yaw: 0.05 °

X-LSM150B-SV2-KX14P is a kit, comprised of:

Product CodeQtyDescriptionWeight
X-LSM150B-SV21High vacuum, motorized Linear Stage, 150 mm travel, integrated controller, medium resolution, medium speed0.47 kg
PS14-48V37-G1Power Supply, 48 V 3.75 A, compatible with X-Series Products0.75 kg
X-DC061Data Cable, 6 ft (2 m), for use with all X-Series products0.08 kg
X-PIB1Device for adding 24 - 48 V power into an X-series daisy chain0.065 kg
X-SDC1Serial adaptor cable with M8 female plug for X-Series products0.09 kg
X-USBDC1USB to serial converter cable with M8 female plug for X-Series products0.06 kg

X-LSM200A-SV2-KX13P

  • Accuracy (unidirectional): 60 µm
  • Backlash: < 12 µm
  • Horizontal Runout: < 27 µm
  • Linear Motion Per Motor Rev: 0.6096
  • Maximum Speed: 24 mm/s
  • Microstep Size (Default Resolution): 0.047625
  • Minimum Speed: 0.000029 mm/s
  • Peak Thrust: 35 N
  • Pitch: 0.04 °
  • Repeatability: < 3 µm
  • Roll: 0.05 °
  • Speed Resolution: 0.000029 mm/s
  • Travel Range: 203.2 mm
  • Vertical Runout: < 32 µm
  • Weight: 0.50 kg
  • Yaw: 0.05 °

X-LSM200A-SV2-KX13P is a kit, comprised of:

Product CodeQtyDescriptionWeight
X-LSM200A-SV21High vacuum, motorized Linear Stage, 200 mm travel, integrated controller, fine resolution, low speed0.50 kg
PS13-48V12-G1Power Supply, 48 V 1.25 A, compatible with X-Series Products0.44 kg
X-DC061Data Cable, 6 ft (2 m), for use with all X-Series products0.08 kg
X-PIB1Device for adding 24 - 48 V power into an X-series daisy chain0.065 kg
X-SDC1Serial adaptor cable with M8 female plug for X-Series products0.09 kg
X-USBDC1USB to serial converter cable with M8 female plug for X-Series products0.06 kg

X-LSM200A-SV2-KX14P

  • Accuracy (unidirectional): 60 µm
  • Backlash: < 12 µm
  • Horizontal Runout: < 27 µm
  • Linear Motion Per Motor Rev: 0.6096
  • Maximum Speed: 24 mm/s
  • Microstep Size (Default Resolution): 0.047625
  • Minimum Speed: 0.000029 mm/s
  • Peak Thrust: 35 N
  • Pitch: 0.04 °
  • Repeatability: < 3 µm
  • Roll: 0.05 °
  • Speed Resolution: 0.000029 mm/s
  • Travel Range: 203.2 mm
  • Vertical Runout: < 32 µm
  • Weight: 0.50 kg
  • Yaw: 0.05 °

X-LSM200A-SV2-KX14P is a kit, comprised of:

Product CodeQtyDescriptionWeight
X-LSM200A-SV21High vacuum, motorized Linear Stage, 200 mm travel, integrated controller, fine resolution, low speed0.50 kg
PS14-48V37-G1Power Supply, 48 V 3.75 A, compatible with X-Series Products0.75 kg
X-DC061Data Cable, 6 ft (2 m), for use with all X-Series products0.08 kg
X-PIB1Device for adding 24 - 48 V power into an X-series daisy chain0.065 kg
X-SDC1Serial adaptor cable with M8 female plug for X-Series products0.09 kg
X-USBDC1USB to serial converter cable with M8 female plug for X-Series products0.06 kg

X-LSM200B-SV2-KX13P

  • Accuracy (unidirectional): 85 µm
  • Backlash: < 16 µm
  • Horizontal Runout: < 27 µm
  • Linear Motion Per Motor Rev: 2.4384
  • Maximum Speed: 100 mm/s
  • Microstep Size (Default Resolution): 0.1905
  • Minimum Speed: 0.000116 mm/s
  • Peak Thrust: 15 N
  • Pitch: 0.04 °
  • Repeatability: < 6 µm
  • Roll: 0.05 °
  • Speed Resolution: 0.000116 mm/s
  • Travel Range: 203.2 mm
  • Vertical Runout: < 32 µm
  • Weight: 0.50 kg
  • Yaw: 0.05 °

X-LSM200B-SV2-KX13P is a kit, comprised of:

Product CodeQtyDescriptionWeight
X-LSM200B-SV21High vacuum, motorized Linear Stage, 200 mm travel, integrated controller, medium resolution, medium speed0.50 kg
PS13-48V12-G1Power Supply, 48 V 1.25 A, compatible with X-Series Products0.44 kg
X-DC061Data Cable, 6 ft (2 m), for use with all X-Series products0.08 kg
X-PIB1Device for adding 24 - 48 V power into an X-series daisy chain0.065 kg
X-SDC1Serial adaptor cable with M8 female plug for X-Series products0.09 kg
X-USBDC1USB to serial converter cable with M8 female plug for X-Series products0.06 kg

X-LSM200B-SV2-KX14P

  • Accuracy (unidirectional): 85 µm
  • Backlash: < 16 µm
  • Horizontal Runout: < 27 µm
  • Linear Motion Per Motor Rev: 2.4384
  • Maximum Speed: 100 mm/s
  • Microstep Size (Default Resolution): 0.1905
  • Minimum Speed: 0.000116 mm/s
  • Peak Thrust: 15 N
  • Pitch: 0.04 °
  • Repeatability: < 6 µm
  • Roll: 0.05 °
  • Speed Resolution: 0.000116 mm/s
  • Travel Range: 203.2 mm
  • Vertical Runout: < 32 µm
  • Weight: 0.50 kg
  • Yaw: 0.05 °

X-LSM200B-SV2-KX14P is a kit, comprised of:

Product CodeQtyDescriptionWeight
X-LSM200B-SV21High vacuum, motorized Linear Stage, 200 mm travel, integrated controller, medium resolution, medium speed0.50 kg
PS14-48V37-G1Power Supply, 48 V 3.75 A, compatible with X-Series Products0.75 kg
X-DC061Data Cable, 6 ft (2 m), for use with all X-Series products0.08 kg
X-PIB1Device for adding 24 - 48 V power into an X-series daisy chain0.065 kg
X-SDC1Serial adaptor cable with M8 female plug for X-Series products0.09 kg
X-USBDC1USB to serial converter cable with M8 female plug for X-Series products0.06 kg
Zaber-CE-Declaration-of-Conformity-Machinery
Zaber-CE-Declaration-of-Conformity-EMC
Getting-started-guide
X-LSM025x-SV.step
BACK
TO TOP

Request a Demo

X-LSM-SV2 Series

Ask the Expert

If you’re interested in the products shown here, or have questions about something you can’t find on our website, please get in touch through the form below.

Our knowledgeable sales team will be happy to help. We can normally source exactly what you need, or work with you to come up with custom solutions.

Alternatively, just call +44 (0) 1933 461 666 and ask to speak to the Photonics team.