Laser 2000

Short Pulse (ns/ps/fs) Lasers

Ultrashort pulse lasers – femtosecond, picosecond and nanosecond

As there is no generally accepted specification for the term ‘Ultrashort’ the lasers presented here range from nanoseconds (ns) down to femtoseconds (fs).

There are many methods for generating ultrashort pulses. Generally for the LEDs and Laser diodes detailed below the electronics have been carefully designed to allow optical pulses in the tens of nanoseconds to be obtained, with pulse repetition rates from CW to MHz.

For shorter pulse durations the lasers can operate in a Q-Switched or mode locked regime. In Q-Switching energy is stored in the amplifying medium by optical pumping while the cavity Q is lowered (i.e. Higher cavity losses) to prevent the onset of lasing. When the cavity Q is restored, the stored energy is suddenly released in the form of a short pulse of light. In this mode high pulse energies (mJ’s) can be achieved with pulse repetition rate in the Hz to kHz.

Mode locking can be both active and passive. Passively mode-locked lasers are typically based on a saturable absorber, which allows for the generation of short pulses but has issues with jitter and electronic control. For those applications that require synchronisation with an external electronic signal active mode locking techniques are employed.

Showing 1–16 of 23 results

Filter selection by:
Pulse Width
Showing 11 – 20 of 23 results Showing all 23 results Showing one result No results found, please broaden your parameters, or get in touch.
10 per page
Filters Sort results
Reset Apply
Products
Product Code
Description
High Power Nanosecond Pulsed LEDs
High Power Nanosecond Pulsed LEDs   Features: Wavelengths from 245 to 600 nm Average power up to 300 µW (pulsed and CW) Pulse widths 0.8 to 2 ns (FWHM) Repetition rate from single shot up to 40 MHz Pulsed, burst and CW mode Optional band pass filter available for improved spectral purity   The high […]
Picosecond pulsed LEDs
PLS Series
(
0.8 ns - 1.3 ns
)
Sub-nanosecond pulsed LEDs
Compact Diode Lasers for OEM Integration
CPDL-M/S Series
(
<100 ps
)
Compact Diode Lasers for OEM Integration   Features: Compact design for integration Wavelengths between 375 and 1990 nm Pulse widths < 100 ps Fixed intensity setting Internally triggered or externally triggered versions   Laser modules from the CPDL-M/S Series can be used for various applications including: Time-resolved measurements and fluorescence lifetime Diffusion measurements Testing and […]
Compact Diode Lasers for OEM Integration
Compact Diode Lasers for OEM Integration   Features: Compact design for integration Wavelengths: 1030, 1064, 1530, 1550 nm (others upon request) Pulse width < 100 ps Any rep rate 1 kHz up to 100 MHz Average power up to 50 mW (including fibre amplifier) Flexible interface USB or RS 232   Applications: Laser modules from […]
Programmable Pulsed Laser
Programmable Pulsed Laser Programmable nanosecond pulse shapes 0.1 ns to CW Average power up to 20 mW Extinction ratio up to 70 dB FC/APC output, polarisation maintaining   The PPL 512 / PPA 512 is a stand-alone, computer controlled laser platform for the generation of nanosecond pulses with programmable pulse shapes. The resulting laser signal, […]
Programmable Pulse Generator
Programmable Pulse Generator Programmable Pulse Generator Arbitrary pulse generator for the monitoring of Electro-Optic Modulators (EOM) 5 GS/s, 200 ps time bins Record length 512 Bytes / 102.4 ns, 8 bit resolution High output amplitude, up to 12 V into 50 Ohm   Applications: The PPG 512 programmable pulse generator can be used for various […]
Passive Q-Switched Lasers
Passive Q-Switched Lasers
(
1.0 ns - 2.5 ns
)
CryLaS pulsed laser sources based on diode-pumped passively Q switched solid state microchip technology and, depending on the needs of the application, three different product lines at five discrete wavelengths (213nm, 266nm, 355nm 532nm and 1064nm) with energies up to 2.5mJ, repetition rates up to 20 kHz and pulse widths between 1-2.5ns. All laser sources come with control unit, power supply and software.
DPSS Active Q-Switched Lasers
Active Q-Switched Lasers
(
10 ns – 20 ns
)
CrystaLaser designs and manufactures state of the art ultra-compact diode-pumped Nd:YAG, Nd:YVO4 and Nd:YLF crystal lasers. Our lasers feature with low noise, high stability, high efficiency, high reliability and excellent laser beam quality. These lasers are suitable for OEM, scientific and industrial use. Wavelengths of the Q-switched laser available from UV to IR (nm): 262, 266, 349, 351, 355, 440, 447, 473, 523, 527, 532, 555, 561, 589, 593, 660, 671, 946, 1047, 1053, 1064, 1313, 1320, 1340 Contact us for other wavelengths and output powers
Tunable Mid-IR CW/Pulsed Laser
Hedgehog
(
≥ 40 ns
)
A unique combination of small size, tuning speeds up to >5000 cm-1/s, CW or pulsed output, high power, TEM00 beam quality, and unmatched spectral repeatability. Available centre wavelengths span the Mid-IR spectrum from 4-13 µm. Select from 3 standard Hedgehog models: the Hedgehog (tunes up to 200 cm-1), Hedgehog-UT (up to 400 cm-1), and Hedgehog-LT (up to 30 cm-1)
Compact Picosecond Fibre Laser for BioPhotonics
ANTARES Series
(
<10 ps
)
Compact narrow linewidth picosecond fibre laser. Available at 1030 nm or 1064 nm.
123
BACK
TO TOP

Ask the Expert

For over 30 years, Laser 2000 has supplied fibre optic equipment and worked with global partners like VIAVI Solutions, US Conec and INNO Instrument.

For more information on our fibre optic technology and our wide range of products, please visit our Laser 2000 Networks website, or get in touch with our specialist through the form below.

Alternatively, just call +44 (0) 1933 461 666 and ask to speak to Peter.

Peter Collins

Peter Collins

BSc (Hons)

Ask the Expert

If you’re interested in the products shown here, or have questions about something you can’t find on our website, please get in touch through the form below.

Our knowledgeable sales team will be happy to help. We can normally source exactly what you need, or work with you to come up with custom solutions.

Alternatively, just call +44 (0) 1933 461 666 and ask to speak to the Photonics team.

Ask the Expert

If you’re interested in the products shown here, or can’t find exactly what you need, please get in touch with our specialist through the form below.

Alternatively, just call +44 (0) 1933 461 666 and ask to speak to Toby.

Toby Scrivener

MPhys (Hons)

Ask the Expert

If you’re interested in the products shown here, or can’t find exactly what you need, please get in touch with our specialist through the form below.

Alternatively, just call +44 (0) 1933 461 666 and ask to speak to Karen.

Karen McGeachy West

MPhys (Hons)

Ask the Expert

If you’re interested in the products shown here, or can’t find exactly what you need, please get in touch with our specialist through the form below.

Alternatively, just call +44 (0) 1933 461 666 and ask to speak to Peter.

Peter Collins

Peter Collins

BEng (Hons), MSc (Eng)

Ask the Expert

If you’re interested in the products shown here, or can’t find exactly what you need, please get in touch with our specialist through the form below.

Alternatively, just call +44 (0) 1933 461 666 and ask to speak to Sian.

Siân Brooks

BSc (Hons)

Ask the Expert

If you’re interested in the products shown here, or can’t find exactly what you need, please get in touch with our specialist through the form below.

Alternatively, just call +44 (0) 1933 461 666 and ask to speak to Paul.

Paul Williams

PhD

Ask the Expert

If you’re interested in the products shown here, or can’t find exactly what you need, please get in touch with our specialist through the form below.

Alternatively, just call +44 (0) 1933 461 666 and ask to speak to Lisa.

Lisa Thomson

MPhys

Ask the Expert

If you’re interested in the products shown here, or can’t find exactly what you need, please get in touch with our specialist through the form below.

Alternatively, just call +44 (0) 1933 461 666 and ask to speak to Shannon.

Shannon O’Connor

BSc (Hons)