Laser 2000

ORCA-spark Digital CMOS Camera

C11440-36U

The ORCA-spark is a fast, low noise, and high-sensitivity digital CMOS camera. At a significantly lower cost, it out-performs Hamamatsu’s popular interline CCD cameras such as the ORCA-R2.

Noise, in particular, can be an overriding factor in many experiments. Fluorescence from your samples can sometimes get lost in a sea of ambient photons, autofluorescence, or even camera readout noise. In addition, fluorescence photons in low-light conditions can become over- or underexposed and, therefore, inaccurately recorded.

The low readout noise (6.6 electrons) and wide dynamic range (5,000:1) afforded by the 2.3 megapixel CMOS sensor means that the ORCA Spark will accurately record fluorescence signals, even in noisy or low-light conditions.

We know it can be challenging to accurately capture fast-moving samples. But this isn’t an issue when imaging with the ORCA-spark. It has a global shutter, and achieves a high-speed readout of 65 frames per second, so you can image fast-moving objects without blurring.

Solutions that balance cost and performance is what we specialise and take pride in at Laser 2000. And with the ORCA-spark, you won’t be disappointed.

Here are some example applications that the ORCA-spark thrives in:

  • Low-light-level imaging
  • Microscope observation
  • X-ray scintillator readout

Features

  • 2.3 megapixel CMOS sensor
  • High-speed readout of approx. 65 frames/s
  • Low readout noise of 6.6 electrons
  • Wide dynamic range of 5000 : 1
  • Global shutter
  • USB 3.0 interface

Applications

  • Low-light-level imaging
  • Microscope observation
  • X-ray scintillator readout

 

What’s included?

The ORCA-spark package contains all the accessories required to communicate with your PC, including:

  • 1 x USB 3.0 board
  • 1 x USB 3.0 Micro-B cable

HCImage Live software is included at no extra cost. However, you can also operate the camera using third party software such as µManager and LabVIEW in conjunction with your microscope and peripheral devices.

To find out more about the ORCA-spark, or indeed any other Hamamatsu camera, contact us by phone or email.

If you’d like to see how well the ORCA-spark works in your own experiment, we’ll gladly lend you one for free, with no obligation to purchase. As we have a limited stock of evaluation cameras, please register your interest as soon as possible to avoid disappointment.

A/D Converter: 12 bit
Ambient Operating Humidity: 30 % to 70 % at Forced-air cooled (with no condensation)
Ambient Operating Temperature: 0 °C to +40 °C
Ambient Storage Humidity: 90 % max. (with no condensation)
Ambient Storage Temperature: -10 °C to +50 °C
Analog Gain: 1x to 15.8x (240 steps)
Binning: 2 x 2 [1]
Connector Type: USB 3.0 microB type
Dynamic Range: 5000: 1
Effective Area: 11.25 mm (H) x 7.03 mm (V)
Effective Number of Pixels: 1920 x 1200pixels
Exposure Time: 1 ms to 1 s (External trigger mode: Level, Synchronous readout)
Exposure Time: 26.17 μs to 10 s (Internal mode)
Exposure Time: 26.17 μs to 10 s (External trigger mode: Edge, Start)
External Trigger Input Mode: Edge trigger, Level trigger, Synchronous readout trigger, Start trigger
External Trigger Mode: Yes
External Trigger Signal Routing: SMA
Full Well Capacity: 33000 electrons
Imaging Device: CMOS image sensor
Interface: USB 3.0
Lens Mount: C-mount
Pixel Size: 5.86 x 5.86µm
Power Consumption: Approx. 20 VA
Power Supply: DC +12 V
Readout Noise: 6.6 electrons
Readout Speed: 2008.9 frames/s (2 Line Sub-array)
Readout Speed: 64.9 frames/s (Full resolution)
Sub-array: Yes
Trigger Delay Function: 0 µs to 10 s in 1 μs steps
Trigger Output: Programmable timing outputs, Low output, High output, Global exposure timing output, Trigger ready output

*1 Calculated from the ratio of the full well capacity and the readout noise.
*2 Digital binning processing in the camera.

C11440-36U Datasheet
BACK
TO TOP

Request a Demo

C11440-36U

Ask the Expert

If you’re interested in the products shown here, or have questions about something you can’t find on our website, please get in touch through the form below.

Our knowledgeable sales team will be happy to help. We can normally source exactly what you need, or work with you to come up with custom solutions.

Alternatively, just call +44 (0) 1933 461 666 and ask to speak to the Photonics team.