| Wavelength |
BladeCam2-HR: 355 to 1150 nm
BladeCam2-HR-1310: 355 to 1350 nm
BladeCam2-HR-TEL: 1480 to 1605 nm
BladeCam2-HR-UV: 190 to 1150 nm |
| Included Filters |
BladeCam2-HR: C-mount ND-1, ND-2, ND-4
BladeCam2-HR-1310: C-mount ND-1, ND-2, ND-4 & 1″ longpass filter w/ C-mount adapter
BladeCam2-HR-TEL: C-mount ND-1, ND-2, ND-4 & 1″ longpass filter w/ C-mount adapter
BladeCam2-HR-UV: C-mount ND-1, ND-2, ND-4 & 1″ absorptive ND-1, ND-2, ND-4 w/ C-mount adapter |
| Pixel Count, H x V |
1.3 Mpixel, 1280 x 1024 |
| Image Area |
6.6 x 5.3 mm |
| Pixel Dimension |
5.2 x 5.2 µm |
| Min. Beam (10 pixels) |
~52 µm |
| Shutter Type |
Rolling |
| Max. Full Frame Rate |
≥9 Hz |
| Max. ‘Every Pulse’ PRR |
N/A |
| Single Pulse Capture PRR |
N/A |
| Signal to RMS Noise |
1,000:1 |
| (Opt./Elec.* dB) |
(30/60* dB) |
| Dynamic Range |
41 dB |
| ADC |
10-bit (1,024 levels) |
| Measurable Sources |
CW beams
Software configurable Auto-trigger |
| Measured Beam Powers |
See Saturation Power Graph in datasheet |
| Manual Beam Attenuation |
Provided filters, other attenuation accessories available |
| Displayed Profiles |
Line, 2D & 3D plots. Normalized or un-normalized.
Linear or Logarithmic, Zoom x10
2D, 3D in 10, 32 or max. colors or grayscale
Contoured display at 10 and 32 colors |
| Measured & Displayed Profile Parameters |
Raw and smoothed profiles
Triangular running average filter up to 10% FWHM |
| Beam Diameter |
Diameter at two user set Clip levels
Gaussian & ISO 11146 Second Moment beam diameters
Equivalent diameter above a user defined Clip level
Equivalent Slit and Knife Edge diameters |
| Beam Fits |
Gaussian & Top Hat profile fit & % fit
Equivalent Slit profile |
| Beam Ellipticity |
Major, Minor & Mean diameters. Auto-orientation of axes. |
| Centroid Position |
Relative and absolute
Intensity Weighted Centroid and Geometric Center
Beam Wander Display and Statistics |
| Measurement Accuracy (not limited to pixel size) |
0.1 µm processing resolution for interpolated diameters.
Absolute accuracy is beam profile dependent – ~1 µm accuracy is frequently achievable.
Centroid accuracy is also beam dependent (as good as ±1 µ since it is arithmetically determined from all pixels above the centroid clip level). |
| Processing Options |
Image & profile Averaging, 1, 5, 10, 20, Continuous.
Background Capture and Subtraction.
User set rectangular Capture Block for capture
User set or Auto ellipse Inclusion region with beam tracking for processing
*.ojf files save all WinCamD custom settings for particular test configurations |
| Update Rates |
≥9 Hz maximum for full frame, full screen. Higher for small Capture Blocks |
| Pass/Fail display |
On-screen selectable Pass/Fail colors. Ideal for QA & Production. |
| Log Data and Statistics |
Min., Max., Mean, Standard Deviation, to 4096 samples |
| Relative Power Measurement |
Rolling histogram based on user’s initial input. Units of mW, µJ, dBm, % or user choice (relative to a reference measurement input) |
| Fluence |
Fluence, within user defined area |
| Certification |
RoHS, WEEE, CE |
| Multiple Cameras |
Up to 4 cameras, parallel capture.
1 to 8 cameras, serial capture. |
| Head Dimensions, Width x Height x Depth |
46 x 46 x 16.5 mm (1.8 x 1.8 x 0.65″) with 5 mm ND filter holder |
| Optical depth from housing/filter to sensor (no window) ±0.2 mm |
4.0/ 8.5 mm (verify before purchasing) |
| Mounting |
1/4″-20 holes aligned with sensor center. 4-40 holes on camera rear. |
| Weight, Camera Head |
85 g (3 oz) |
| Minimum PC Requirements |
Windows 7/8/8.1/10 64-bit, 4 GB RAM, USB 2.0/3.0 port |
