Laser 2000
Home > Products > Manual & Motorised Motion > Rotary Stages > Goniometers > Low vacuum motorized goniometers with built-in controllers

Low vacuum motorized goniometers with built-in controllers

Zaber Technologies Logo

  • Vacuum compatible to 10-3 Torr
  • 40 mm and 60 mm centre of rotation options allow for two axes of motion about a common centre of rotation
  • Built-in controller; daisy-chains with other Zaber Technologies products
  • Only 4 feedthrough wires required to control all units in the daisy-chain via serial port (with an X-PIB adaptor)

Features:

1. 200 step per revolution stepper motor, microstepped up to 256x to provide smooth and precise motion.
2. Integrated stepper motor controller and motor driver allows for easy-to-use control.
3. Only 4 feedthrough wires required to control all units in the daisy-chain via serial port (with an X-PIB adaptor).
4. Daisy-chain additional units to reduce wiring clutter. Power and data can be shared in the chain.
5. Low vacuum compatible stepper motors rated to 10-3 Torr.
6. 40 mm and 60 mm centre of rotation options allow for two axes of motion about a common centre of rotation.
7. Crossed roller bearings for smooth motion and high stiffness.
8. M2 (20 mm pattern) and M3 (32 mm pattern) mounting holes provided.
9. The interlocking alignment system makes it easy to stack two stages.
10. Low profile, small footprint.

Zaber Technologies’ X-GSM-SV1 Series devices are low-vacuum compatible, computer-controlled, motorized goniometers with a compact size and built-in controller. They are stand-alone units requiring only a standard 24 V or 48 V power supply.

 

Zaber Technologies ASCII Protocol Manual (Wiki)
Zaber Technologies Binary Protocol Manual (Wiki)

Weight 0.32 kg
Accuracy (unidirectional)

0.06 °

Axes of Motion

1

Backlash

< 0.01 °

Built-in Controller

Yes

CE Compliant

Yes

Communication Interface

RS-232

Communication Protocol

Zaber Technologies ASCII (Default), Zaber Technologies Binary

Data Cable Connection

Teflon flying leads with M8 4 pin M/F

Default Resolution

1/64 of a step

Encoder Type

None

Guide Type

Crossed roller bearing

Inductance

3.5 mH/phase

Limit or Home Sensing

Magnetic home and away sensors

Manual Control

No

Maximum Centered Load

30 N

Maximum Speed

30 deg/s

Mechanical Drive System

Precision Worm Gear

Motor Frame Size

NEMA 08

Motor Steps Per Rev

200

Motor type

Stepper (2 phase)

Mounting Interface

M2 and M3 mounting holes

Operating Temperature

0 – 50 °C

Positional Repeatability

0.005 °

Power Plug

None, use X-PIB

Power Supply

24-48 VDC

Repeatability

< 0.005

RoHS Compliant

Yes

Rotation Centre Accuracy

< 0.1 mm

Rotation Centre Height

40 mm, 60 mm

Vacuum Compatible

Low vacuum (10-3 Torr)

Weight

0.320 kg

Motor Rated Current

800 mA/phase

X-GSM40-SV1-KX13P

  • Angular Motion Per Motor Rev: 2.08101654144 °
  • Microstep Size (Default Resolution): 0.0001625794173
  • Minimum Speed: 0.00009923 deg/s
  • Travel Range: +/-10 °
  • Kit: 48 V Powers multiple X-Series devices

X-GSM40-SV1-KX13P is a kit, comprised of:

Product CodeQtyDescriptionWeight
X-GSM40-SV11Low vacuum, motorized goniometer stage, integrated controller, 40 mm centre of rotation0.320 kg
PS13-48V12-G1Power Supply, 48 V 1.25 A, compatible with X-Series Products0.44 kg
X-DC061Data Cable, 6 ft (2 m), for use with all X-Series products0.08 kg
X-SDC1Serial adaptor cable with M8 female plug for X-Series products0.09 kg
X-USBDC1USB to serial converter cable with M8 female plug for X-Series products0.06 kg
X-PIB1Device for adding 24 - 48 V power into an X-series daisy chain0.065 kg

X-GSM40-SV1-KX14P

  • Angular Motion Per Motor Rev: 2.08101654144 °
  • Microstep Size (Default Resolution): 0.0001625794173
  • Minimum Speed: 0.00009923 deg/s
  • Travel Range: +/-10 °
  • Kit: 48 V Powers multiple one axis

X-GSM40-SV1-KX14P is a kit, comprised of:

Product CodeQtyDescriptionWeight
X-GSM40-SV11Low vacuum, motorized goniometer stage, integrated controller, 40 mm centre of rotation0.320 kg
PS14-48V37-G1Power Supply, 48 V 3.75 A, compatible with X-Series Products0.75 kg
X-DC061Data Cable, 6 ft (2 m), for use with all X-Series products0.08 kg
X-SDC1Serial adaptor cable with M8 female plug for X-Series products0.09 kg
X-USBDC1USB to serial converter cable with M8 female plug for X-Series products0.06 kg
X-PIB1Device for adding 24 - 48 V power into an X-series daisy chain0.065 kg

X-GSM60-SV1-KX13P

  • Angular Motion Per Motor Rev: 1.44820885888 °
  • Microstep Size (Default Resolution): 0.0001131413171
  • Minimum Speed: 0.00006906 deg/s
  • Travel Range: +/-7 °

X-GSM60-SV1-KX13P is a kit, comprised of:

Product CodeQtyDescriptionWeight
X-GSM60-SV11Low vacuum, motorized goniometer stage, integrated controller, 60 mm centre of rotation0.320 kg
PS13-48V12-G1Power Supply, 48 V 1.25 A, compatible with X-Series Products0.44 kg
X-DC061Data Cable, 6 ft (2 m), for use with all X-Series products0.08 kg
X-SDC1Serial adaptor cable with M8 female plug for X-Series products0.09 kg
X-USBDC1USB to serial converter cable with M8 female plug for X-Series products0.06 kg
X-PIB1Device for adding 24 - 48 V power into an X-series daisy chain0.065 kg

X-GSM60-SV1-KX14P

  • Angular Motion Per Motor Rev: 1.44820885888 °
  • Microstep Size (Default Resolution): 0.0001131413171
  • Minimum Speed: 0.00006906 deg/s
  • Travel Range: +/-7 °

X-GSM60-SV1-KX14P is a kit, comprised of:

Product CodeQtyDescriptionWeight
X-GSM60-SV11Low vacuum, motorized goniometer stage, integrated controller, 60 mm centre of rotation0.320 kg
PS14-48V37-G1Power Supply, 48 V 3.75 A, compatible with X-Series Products0.75 kg
X-DC061Data Cable, 6 ft (2 m), for use with all X-Series products0.08 kg
X-SDC1Serial adaptor cable with M8 female plug for X-Series products0.09 kg
X-USBDC1USB to serial converter cable with M8 female plug for X-Series products0.06 kg
X-PIB1Device for adding 24 - 48 V power into an X-series daisy chain0.065 kg
BACK
TO TOP

Request a Demo

X-GSM-SV1 Series

Ask the Expert

If you’re interested in the products shown here, or have questions about something you can’t find on our website, please get in touch through the form below.

Our knowledgeable sales team will be happy to help. We can normally source exactly what you need, or work with you to come up with custom solutions.

Alternatively, just call +44 (0) 1933 461 666 and ask to speak to the Photonics team.