Laser 2000

Micro-photoluminescence Upgrade

Micro-photoluminescence Upgrade

Micro-photoluminescence Multimodal Imaging

  • Steady-state and time-resolved spectra from defined regions of interest
  • Multidimensional dataset: spectral, temporal, and spatial information
  • Various microscope-spectrometer coupling options
  • Highly modular and flexible design
  • Outstanding spectral and temporal sensitivity

PicoQuant specialises in time-resolved spectrometers and microscopes. Combining expertise from both fields, we offer instruments for time-resolved micro-photoluminescence spectroscopy that integrate spatial, spectral, and lifetime measurements. By coupling microscopes and spectrometers, both high-resolution steady-state and time-resolved emission spectra of specific sample regions or points of interest can be acquired. These multi-dimensional data sets provide valuable new insights that are beneficial to materials science in a variety of fields such as photovoltaics, LEDs, and semiconductors. In particular, the combination of spectral and lifetime measurements of micro-photoluminescence is essential for a comprehensive understanding of the local photo-physical and electronic properties of different types of materials or devices.

Micro-photoluminescence excitation and emission spectra, on the one hand, are fundamental for analyzing a wide range of materials. On the other hand, microscope images reveal the spatial variation of luminescence properties, e.g., due to structural defects in materials. Moreover, the luminescence lifetime is an intrinsic characteristic of materials, which can be used either for their identification or to sense their local environment. By combining all three types of information from correlated data sets, researchers can draw new conclusions about the properties and behavior of the materials under study.

spectra_decay__large

Application

  • Solar cells and photovoltaics
  • (Organic) Light Emitting Diodes (LED)
  • Photocatalysis
  • Nanoparticles and 2D materials
  • Upconversion materials

 

Depending on your application and requirements, various microscopes (FluoMic, MicroTime 100, MicroTime 200) can be combined with either a spectrometer (FluoTime 300, FluoTime 250) or the FlexWave wavelength selector unit.

FluoMic MicroTime 100 MicroTime 200
Microscope body upright upright inverted
Observation volume µm-sized (2 – 100 µm) confocal confocal
Imaging speed optional scanning upgrade, depending on piezo scanner, > 30 sec depending on piezo scanner, > 30 sec
depending on piezo scanner, > 30 sec or FLIMbee galvo scanner, with FLIMbee several fps*
Software SymPhoTime 64 for data acquisition and analysis
Carrier diffusion upgrade No Yes Yes

 

FluoTime 250 FluoTime 300 FlexWave
Detector type PMA Hybrid PMA Hybrid, NIR PMT PMA Hybrid, SPAD
Number of detectors 1 01-Feb 01-Apr
Spectral range UV – VIS UV – VIS – NIR 400 – 1000 nm
Spectral resolution Single monochromator 1 nm Single monochromator 1 nm, double monochromator better 0.1 nm 1 nm
Detection sensitivity Loss in single monochromator 60 – 70 % depending on grating and coating Loss in double monochromator 70 – 75 % depending on grating and coating Transmission > 80 %
Software EasyTau 2 EasyTau 2 SymPhoTime 64
Data Time-resolved emission spectra at point of interest Time-resolved emission spectra at point of interest Time-resolved emission spectra at point of interest, TRES imaging, wavelength-dependent antibunching

* FLIMbee only available with FluoTime coupling, not compatible with FlexWave.

The confocal microscopes MicroTime 100 and MicroTime 200, that acquire time-resolved images, can also be equipped with either a spectrograph and EMCCD camera to obtain steady-state emission spectra per image pixel, or with a spectrograph and sFLIM detector to measure time-resolved emission spectra per image pixel.

Depending on the research question and type of sample, one technical implementation may be more suitable than others.

BACK
TO TOP

Request a Demo

Micro-photoluminescence Upgrade

Ask the Expert

If you’re interested in the products shown here, or have questions about something you can’t find on our website, please get in touch through the form below.

Our knowledgeable sales team will be happy to help. We can normally source exactly what you need, or work with you to come up with custom solutions.

Alternatively, just call +44 (0) 1933 461 666 and ask to speak to the Photonics team.