Laser 2000
Home > Products > Manual & Motorised Motion > Rotary Stages > Rotary Stages with Built-in Controller > High vacuum motorized rotary stages with built-in controllers

High vacuum motorized rotary stages with built-in controllers

Select from the options below to find the model that’s right for you.

Please see the Series Specs tab for common specs for the X-RSW-SV2 series, and refer to the Options tab for further details of each model.

Zaber Technologies Logo

  • Vacuum compatible to 10-6 Torr
  • Worm gear driven for continuous rotation
  • 20 kg load capacity
  • Speed up to 100 °/s and torque up to 100 N⋅cm
  • Integrated stepper motor controller and motor driver allows for easy-to-use control
  • Only 4 feedthrough wires required to control all units in the daisy-chain via serial port (with an X-PIB adaptor)

Features:

1. Integrated stepper motor controller and motor driver allows for easy-to-use control.
2. 200 step per revolution stepper motor, microstepped up to 256x to provide smooth and precise motion.
3. High vacuum compatible stepper motors rated to 10-6 torr.
4. Only 4 feedthrough wires required to control all units in the daisy-chain via serial port (with an X-PIB adaptor).
5. Daisy-chain additional units to reduce wiring clutter. Power and data can be shared in the chain.
6. Innovative design allows for superior speed & load capabilities; up to 100 deg/s speed & 20 kg load.
7. Stage top supports metric M6 threaded holes as well as UNC #8-32 holes; centre lens holder fits 1′ and 25 mm optics.
8. Holes on bottom and two sides provide flexible mounting options; can be mounted directly on other Zaber Technologies stages.

Zaber Technologies’ X-RSW-SV2 Series devices are high-vacuum compatible, computer-controlled, motorized rotary stages with built-in controllers. They are stand-alone units requiring only a standard 24 – 48 V power supply.

 

Zaber Technologies ASCII Protocol Manual (Wiki)
Zaber Technologies Binary Protocol Manual (Wiki)

Weight 0.72 kg
Built-in Controller

Yes

CE Compliant

Yes

RoHS Compliant

Yes

Communication Interface

RS-232

Communication Protocol

Zaber Technologies ASCII (Default), Zaber Technologies Binary

Data Cable Connection

Teflon flying leads with M8 4 pin M/F

Default Resolution

1/64 of a step

Encoder Type

None

Limit or Home Sensing

Magnetic home sensor

Manual Control

No

Maximum Current Draw

950 mA

Mechanical Drive System

Precision Worm Gear

Motor Steps Per Rev

200

Motor type

Stepper (2 phase)

Operating Temperature

0 – 50 °C

Positional Repeatability

0.02 °

Power Plug

None, use X-PIB

Power Supply

24-48 VDC

Vacuum Compatible

High vacuum (10-6 Torr)

Maximum Cantilever Load

410 N·cm

X-RSW60A-SV2-KX13P

  • Kit: Power supply, 48 V 1.25 A

X-RSW60A-SV2-KX13P is a kit, comprised of:

Product CodeQtyDescriptionWeight
X-RSW60A-SV21High vacuum, motorized rotary stage, 360 degree rotation, 60 mm diameter, integrated controller, fine resolution, low speed0.72 kg
PS13-48V12-G1Power Supply, 48 V 1.25 A, compatible with X-Series Products0.44 kg
X-DC061Data Cable, 6 ft (2 m), for use with all X-Series products0.08 kg
X-PIB1Device for adding 24 - 48 V power into an X-series daisy chain0.065 kg
X-SDC1Serial adaptor cable with M8 female plug for X-Series products0.09 kg
X-USBDC1USB to serial converter cable with M8 female plug for X-Series products0.06 kg

X-RSW60A-SV2-KX14P

  • Kit: Power supply, 48 V 3.75 A

X-RSW60A-SV2-KX14P is a kit, comprised of:

Product CodeQtyDescriptionWeight
X-RSW60A-SV21High vacuum, motorized rotary stage, 360 degree rotation, 60 mm diameter, integrated controller, fine resolution, low speed0.72 kg
PS14-48V37-G1Power Supply, 48 V 3.75 A, compatible with X-Series Products0.75 kg
X-DC061Data Cable, 6 ft (2 m), for use with all X-Series products0.08 kg
X-PIB1Device for adding 24 - 48 V power into an X-series daisy chain0.065 kg
X-SDC1Serial adaptor cable with M8 female plug for X-Series products0.09 kg
X-USBDC1USB to serial converter cable with M8 female plug for X-Series products0.06 kg
X-RSW-SV2-Series-Datasheet
Zaber-CE-Declaration-of-Conformity-Machinery
Zaber-CE-Declaration-of-Conformity-EMC
Getting-started-guide
BACK
TO TOP

Request a Demo

X-RSW-SV2 Series

Ask the Expert

If you’re interested in the products shown here, or have questions about something you can’t find on our website, please get in touch through the form below.

Our knowledgeable sales team will be happy to help. We can normally source exactly what you need, or work with you to come up with custom solutions.

Alternatively, just call +44 (0) 1933 461 666 and ask to speak to the Photonics team.